GuidesOneMux

DeepSeek V4.1 Flash 1017 API Cost: A Reproducible Workload Estimate

Estimate DeepSeek V4.1 Flash 1017 costs from explicit token assumptions, published OneMux and official rates, time tiers, and cache-read pricing—with privacy steps for user data and credentials.

AI

Summary · TL;DR

For 5,000 daily requests averaging 3,000 input and 400 output tokens, the illustrative 30-day estimate at OneMux peak rates is $34.98, excluding retries and other overhead. The example makes its assumptions explicit and includes practical steps to minimize sensitive data sent to the model.

Key Takeaways

  • At the November 10, 2026 OneMux price snapshot, published prices are $0.0507 per million input tokens and $0.2028 per million output tokens during peak periods.
  • The illustrative workload totals 15 million input and 2 million output tokens daily; at peak rates, that is $1.1661 per day or $34.983 for 30 days.
  • OneMux lists different off-peak rates and a separate cache-read rate. Apply them only when the request falls within the listed time condition or tokens qualify for cache-read billing.
  • Avoid sending passwords, API keys, and unnecessary personal data to a model. Pricing data does not establish data retention or privacy guarantees.
On this page (8)

Short answer

For a clearly defined workload of 5,000 requests per day, each using 3,000 input tokens and generating 400 output tokens, the estimated 30-day cost through OneMux is $34.983 at peak rates. This is arithmetic from published per-million-token prices, not a measured bill or a guarantee. It excludes retries, tool-call rounds, and any other charges not listed here.

OneMux is the publisher and product discussed in this cost guide. The estimate is useful only if the selected model, billing units, applicable tier, and actual token counts match your traffic.

Price snapshot and comparison

The OneMux catalogue snapshot was captured November 10, 2026. Prices below are in USD per 1 million tokens, as published. The published ratio is reproduced as listed; it is a price ratio, not a measured quality or performance comparison.

Price sourceInput per 1M tokensOutput per 1M tokensPublished price ratio
Official$0.30$1.20—
OneMux, peak$0.0507$0.20280.169

OneMux lists these time and cache-read conditions for this model:

OneMux rateInput per 1M tokensOutput per 1M tokensCache read per 1M tokensCondition
Peak$0.0507$0.2028$0.001014Mon–Fri, 01:00–04:00 and 06:00–10:00 UTC
Off-peak$0.02535$0.1014$0.000507Other times

These are published prices, not a live benchmark. The supplied pricing source reports a separate Fireworks AI schedule of $0.450 per million input tokens and $1.80 per million output tokens, verified October 22, 2026. That schedule differs from the OneMux catalogue snapshot above. Treat provider and route prices as source- and time-specific; do not combine them in one estimate. Source: Future AGI model cost page.

Reproduce the workload estimate

Assume a 30-day month, 5,000 requests every day, and average usage of 3,000 input tokens and 400 output tokens per request. The example assumes all requests are billed at peak rates and none qualify for cache-read pricing.

  1. Daily input: 5,000 × 3,000 = 15,000,000 tokens, or 15 million.
  2. Daily output: 5,000 × 400 = 2,000,000 tokens, or 2 million.
  3. Daily input cost: 15 × $0.0507 = $0.7605.
  4. Daily output cost: 2 × $0.2028 = $0.4056.
  5. Daily total: $0.7605 + $0.4056 = $1.1661.
  6. Thirty-day total: 30 × $1.1661 = $34.983.

At the listed off-peak rates, the same token volumes would cost 15 × $0.02535 + 2 × $0.1014 = $0.58305 per day, or $17.4915 for 30 days. Use this estimate only if the actual requests occur in the published “Other times” window.

A cache scenario can be estimated separately. If, illustratively, 80% of the 15 million daily input tokens qualify for peak cache-read pricing, calculate 12 million × $0.001014 plus 3 million × $0.0507, then add 2 million output tokens × $0.2028. That gives $0.569868 per day, or $17.09604 for 30 days. This is a scenario, not an assumption that 80% of prompts will be cached; verify which tokens the route bills as cache reads.

Keep user data and credentials out of unnecessary prompts

A lower token count can reduce the modeled input cost, but sensitive-data handling should be a separate design decision. A model’s published prices or context limit do not tell you how request data is retained, accessed, or used. Check the applicable provider and routing terms before sending personal or confidential information.

Use this practical pre-send checklist:

  • Remove credentials. Do not include passwords, access tokens, private keys, or session cookies. Replace a secret with a placeholder and perform any credential-dependent action in your own application.
  • Minimize personal data. Send only the fields needed for the task. Redact names, contact details, identifiers, and unrelated account history where possible.
  • Constrain retrieval. If the model needs account context, retrieve only the relevant records and avoid placing entire profiles or conversation archives in the prompt.
  • Separate tools from secrets. Function calling is listed as supported in the supplied model information, but that is not a reason to expose credentials in model-visible text. Keep tool authorization and secret storage in application code, and validate proposed actions before execution.
  • Measure real usage. Record input and output token counts for representative requests, including retries and tool-call rounds. Replace the illustrative averages in the calculation with observed counts before budgeting.

Model limits and estimate boundaries

The supplied model information describes DeepSeek V4.1 Flash 1017 as supporting a 1,048,576-token context window, up to 393,216 output tokens, function calling, vision, reasoning, streaming, structured output, and prompt caching. These are documented capabilities, not evidence of accuracy, latency, or performance on your workload. The source reports no public benchmark scores for this model.

Large context limits do not make it necessary—or privacy-wise advisable—to send more user data. Long prompts increase input-token volume, while generated output is billed separately at a different rate. Estimate both sides and test the exact task with appropriately minimized data.

Conclusion

For the stated 5,000-request workload, use $34.983 per 30 days at peak rates as a reproducible starting estimate, not a forecast. Recalculate with your measured token counts, actual UTC request times, and confirmed cache-read eligibility. Before sending user data or credentials, minimize and redact the prompt; the supplied pricing information does not establish privacy or retention terms.

Sources

Published price snapshot

Captured 2026-11-10T13:30:05.836Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.

ModelOfficial inputOfficial outputOneMux inputOneMux outputPublished price ratio
DeepSeek V4.1 Flash 1017$0.3$1.2$0.0507$0.20280.169

Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.

FAQ

How much does DeepSeek V4.1 Flash 1017 cost through OneMux?

The November 10, 2026 OneMux catalogue snapshot lists peak prices of $0.0507 per million input tokens and $0.2028 per million output tokens. Off-peak prices are $0.02535 and $0.1014 respectively, under the published time conditions.

What is the estimated monthly cost for 5,000 requests a day?

At 3,000 input tokens and 400 output tokens per request, assuming 30 days, peak rates, and no cache-read billing, the estimate is $34.983. Actual costs depend on token counts, timing, retries, and other usage.

How should I handle user credentials in prompts?

Do not send passwords, API keys, private keys, or session cookies. Replace secrets with placeholders, keep authorization in your application, and send only the minimum user data needed. Check applicable provider and routing terms for data handling; prices alone do not establish retention or privacy guarantees.

Does DeepSeek V4.1 Flash 1017 support caching and function calling?

The supplied model information lists prompt caching and function calling as supported. That does not establish that every request receives cache-read pricing or that a particular tool workflow is suitable; confirm route behavior and validate tool actions in your application.

Related articles