GPT 6.2 Sol API cost: a reproducible evaluation budget
Estimate GPT 6.2 Sol evaluation costs with explicit token assumptions, context-tier pricing, cache examples, and repeatable test limits.
Summary · TL;DR
A practical cost model for running repeatable GPT 6.2 Sol evaluations, including tiered token prices, caching, retries, and budget controls.
Key Takeaways
- At the published ≤272K-context rates, an illustrative 1,000-case evaluation using 10 million input tokens and 1 million output tokens costs $3.12 through OneMux or $30 at the listed official rates.
- The >272K context tier has different input and output prices, so long-context cases should be budgeted separately.
- A reproducible evaluation records actual usage, retries, cache activity, and test outcomes rather than relying on a price per request.
On this page (12)
For a repeatable GPT 6.2 Sol evaluation, start with a fixed set of test cases and a token budget—not a cost per request. In the illustrative workload below, 1,000 cases cost $3.12 at the published OneMux rates or $30 at the listed official rates, before retries, caching, tools, or other charges. Actual usage can differ.
OneMux, the publisher of this article, offers model access through an OpenAI-compatible API. This guide uses its published prices alongside listed official prices so you can reproduce the arithmetic and decide what to measure before committing to a larger run.
GPT 6.2 Sol price snapshot
The OneMux model catalogue snapshot was captured on November 21, 2026. The following rates are in US dollars per 1 million tokens. The published price ratio is the OneMux rate divided by the listed official rate; it is not itself a percentage discount.
| Context tier | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| ≤272K | $2 | $10 | $0.208 | $1.04 | 0.104 |
| >272K | $4 | $15 | $0.416 | $1.56 | 0.104 |
The ratio of 0.104 corresponds arithmetically to a 89.6% reduction from the listed official rates for these entries. It does not guarantee that an invoice will be 89.6% lower: tier selection, cache activity, and other charges must also match.
The catalogue labels the tiers by context size but does not specify in the supplied snapshot how every boundary or mixed-size request is billed. Confirm the current tier rules and rates before a run, especially near 272K. The catalogue lists a 1M context; Respan's model page reports up to 1.1M on its largest provider route. Treat context limits as route-specific and verify the route you actually use.
Calculate a baseline evaluation cost
This example is illustrative, not a measured run. Assume:
- 1,000 independent test cases, with one completed request per case.
- Every request falls in the ≤272K tier.
- Each request uses 10,000 input tokens and produces 1,000 output tokens.
- No cache reads or writes, retries, tool charges, or other fees are included.
The workload totals 10 million input tokens and 1 million output tokens. Multiply each total, expressed in millions, by its corresponding price:
| Charge | OneMux calculation | OneMux cost | Official calculation | Official cost |
|---|---|---|---|---|
| Input | 10 × $0.208 | $2.08 | 10 × $2 | $20 |
| Output | 1 × $1.04 | $1.04 | 1 × $10 | $10 |
| Total | $2.08 + $1.04 | $3.12 | $20 + $10 | $30 |
That is $0.00312 per completed case at the illustrated OneMux rate. It is an average derived from this particular workload, not a published per-request price. Input and output lengths, and therefore cost per case, can change between runs.
Set a token ceiling as well as a budget
If the same 1,000 cases each have a maximum output allowance of 2,000 tokens, their output ceiling is 2 million tokens. Keeping input at exactly 10 million tokens, the token-price ceiling becomes $4.16 on OneMux ($2.08 input + $2.08 output), or $40 at the listed official rates ($20 + $20).
This is not a whole-run spending guarantee: it excludes additional attempts, changing inputs, cache writes, tool use, and fees. Enforce separate limits on attempts and total spend where the service supports them. Check whether output limits apply to all billed output for your chosen route.
Budget long-context cases separately
A small number of long cases can have a different unit cost. Assume 10 requests each use 300,000 input tokens and produce 2,000 output tokens, all billed in the >272K tier, without caching or extra charges. Together they use 3 million input tokens and 0.02 million output tokens.
| Rate basis | Input cost | Output cost | Total |
|---|---|---|---|
| OneMux | 3 × $0.416 = $1.248 | 0.02 × $1.56 = $0.0312 | $1.2792 |
| Listed official | 3 × $4 = $12 | 0.02 × $15 = $0.30 | $12.30 |
Do not apply the ≤272K rate to the whole evaluation merely because most cases are short. Record the tier assigned to each request and reconcile it with the provider's usage record.
Account for caching and retries
The same snapshot lists the following cache rates, also in dollars per 1 million tokens. Cache reads, ordinary cache writes, and 12-hour cache writes are distinct categories; confirm eligibility and how usage is reported before applying them.
| Context tier | Official read | Official write | Official 12-hour write | OneMux read | OneMux write | OneMux 12-hour write |
|---|---|---|---|---|---|---|
| ≤272K | $0.10 | $2.50 | $5 | $0.0104 | $0.26 | $0.52 |
| >272K | $0.20 | $5 | $10 | $0.0208 | $0.52 | $1.04 |
For example, if the baseline's 10 million input tokens were instead reported as 2 million ordinary input tokens plus 8 million cache-read tokens, the OneMux token cost would be $0.416 + $0.0832 + $1.04 for output = $1.5392. This excludes the cost of creating the cache and assumes those input categories do not overlap. Do not count cached tokens twice or assume a cache hit without usage evidence.
Retries also change the denominator. If 100 extra attempts each consume the baseline's 10,000 input and 1,000 output tokens, they add 1 million input and 0.1 million output tokens: $0.312 at the ≤272K OneMux rates. A failed attempt may consume different amounts, so use recorded usage rather than this estimate for reconciliation.
Make the evaluation repeatable
- Freeze the test set. Give each case an ID, retain its exact input and expected checks, and label short- and long-context cases. Include ordinary cases, boundary-length cases, malformed inputs, and cases that should be refused or handled cautiously where relevant.
- Fix the run settings. Record the model and route, supported request parameters, output limit, tool availability, and retry policy. API compatibility depends on the endpoint and parameters your chosen route documents; it should not be assumed from a shared API style alone.
- Define pass criteria before running. For example, check whether an answer contains required facts or follows a specified format. Mark checks requiring human judgment separately; a completed response is not automatically a pass.
- Run a small pilot first. Set a request cap and inspect actual input, output, cache, and retry usage. Revise the full-run estimate using observed distributions, not just averages, while keeping the evaluation cases unchanged.
- Save a run ledger. For each case and attempt, retain the outcome, usage by billing category, assigned tier if available, and error or retry reason. Compare token totals and charges with the provider's records.
- Stop on explicit limits. Decide in advance what happens when a request, attempt, token, or spend limit is reached. Report skipped and failed cases rather than silently excluding them from results.
A common failure is comparing a cached rerun with an uncached baseline as though only the model changed. Report cache state, route, case count, and completion rate beside the cost. Tool calls and image inputs need their own documented usage and price assumptions; the supplied information does not establish all such charges.
FAQ
Is the free GPT 6.2 Sol route a reliable budget assumption?
Respan lists an OpenAI route at $0 per million input and output tokens, alongside paid routes. Its availability, limits, and any other applicable charges are not established by the supplied summary. Do not substitute that route's price for OneMux pricing or assume it will serve an entire evaluation.
Do published benchmarks predict my evaluation results?
No. Respan reports published Terminal-Bench 4.0 and GPQA Diamond scores, but those are not measurements of your test set or your chosen route. Use your own fixed cases and pass criteria to assess the workload.
Conclusion
Budget GPT 6.2 Sol evaluations by multiplying expected input, output, and separately reported cache usage by the applicable tier rates. Then validate the estimate with a capped pilot and retain per-attempt records. The resulting cost is reproducible only when the workload, route, limits, and billing assumptions are visible.
Sources
- OneMux GPT 6.2 Sol model page and OneMux pricing: published catalogue snapshot captured November 21, 2026; check current prices before use.
- Respan: GPT-6.2 Sol: route listings, context information, supported input and output types, and reported benchmark references.
Published price snapshot
Captured 2026-11-21T20:30:05.943Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| GPT 6.2 Sol | $2 | $10 | $0.208 | $1.04 | 0.104 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does an illustrative 1,000-case GPT 6.2 Sol evaluation cost?
With 10 million input tokens and 1 million output tokens, all in the ≤272K tier, the published snapshot implies $3.12 at OneMux rates or $30 at listed official rates. The example excludes cache charges, retries, tools, and other fees.
How should long-context requests be estimated?
Separate requests assigned to the >272K context tier and apply its published input, output, and relevant cache rates. Confirm the provider's current tier assignment rules, especially near the boundary.
Does a listed free route mean the whole evaluation is free?
Not necessarily. Respan lists a free route, but the supplied summary does not establish its availability, limits, or all other applicable charges. Its pricing is separate from the OneMux catalogue.
Related articles
Guides
GPT 6.2 Sol API Cost: A Privacy-Aware Workload Estimate
Estimate GPT 6.2 Sol API costs using comparable token prices, explicit workload assumptions, and practical controls for user data and credentials.
Guides
GPT 6.2 Sol API Costs for Incident Diagnosis: A Reproducible Estimate
Estimate GPT 6.2 Sol token costs for API incident diagnosis using explicit workload assumptions, context tiers, retries, and cache scenarios.
Guides
GPT 6.2 Astra API cost estimate for support triage with human approval
Estimate GPT 6.2 Astra token costs for a human-approved customer support triage workflow, with tier and cache examples.
Guides
GPT Image 2.5 API Cost: A Repeatable Evaluation for 100 or 1,000 Usable Images
Estimate GPT Image 2.5 workload costs using explicit token rates, acceptance criteria, test cases, and billed retries.