GuidesOneMux

GPT 6.2 Sol API costs for structured extraction: a reproducible estimate

Estimate GPT 6.2 Sol structured extraction costs using explicit token, retry, cache and context-tier assumptions.

AI

Summary · TL;DR

An illustrative 100,000-document extraction workload costs $1,300 at published OpenAI Standard token rates or $135.20 at the published OneMux rates, before retries, caching and other charges. Actual costs depend on measured usage and applicable billing terms.

Key Takeaways

  • At 4,000 input and 500 output tokens per document, the illustrative token cost is $0.013 per document at official Standard rates and $0.001352 at the published OneMux rates.
  • Budget retries separately: 5,000 full-size retries add $65 at official rates or $6.76 at the published OneMux rates.
  • Requests above 272K input tokens use higher rates for the full request; cache and processing-tier assumptions also change the estimate.
  • Schema-conforming JSON is not proof that extracted values are correct, so measure both validation failures and field accuracy.
On this page (9)

The estimate at a glance

For an illustrative job extracting structured fields from 100,000 documents, budget $1,300 at OpenAI's published Standard token rates or $135.20 at the OneMux catalogue rates. That assumes 4,000 input tokens and 500 output tokens per document, no cached tokens, no retries, and requests at or below 272K input tokens. It is a token-price estimate, not a quote or a measured benchmark.

OneMux is the publisher and product discussed in this comparison. It provides access to models through an OpenAI-compatible API. Check the applicable endpoint, structured-output parameters and current prices before selecting a route.

Prices and units

All rates below are US dollars per 1 million tokens. The OneMux catalogue snapshot was captured on November 18, 2026. The published price ratio is OneMux's rate divided by the corresponding official rate; 0.104 means the listed rate is 10.4% of the official rate, not a 10.4% discount.

Input context per requestOfficial inputOfficial outputOneMux inputOneMux outputPublished price ratio
At or below 272K tokens$2$10$0.208$1.040.104
Above 272K tokens$4$15$0.416$1.560.104

OpenAI's GPT-6.2 Sol documentation specifies that, above 272K input tokens, the higher rates apply to the full request. The OneMux model page lists corresponding context tiers. These comparisons do not establish that the two routes have identical terms or that a particular workload will achieve a particular saving. Check current OneMux pricing and the provider's billing details before committing a budget.

Calculate the extraction workload

Suppose each request sends one text document, extraction instructions and a JSON schema. The response contains the extracted fields. The figures below are assumptions, not observed token counts.

AssumptionIllustrative value
Documents100,000
Input tokens per document, including instructions and schema4,000
Total billed output tokens per document500
Cached input tokensNone
Initial requestsOne per document
Processing rateOfficial Standard or published OneMux rate

The input total is 100,000 × 4,000 = 400 million tokens. The output total is 100,000 × 500 = 50 million tokens. At the short-context rates:

CalculationOfficial StandardPublished OneMux rate
Input: 400 million tokens400 × $2 = $800400 × $0.208 = $83.20
Output: 50 million tokens50 × $10 = $50050 × $1.04 = $52.00
Total for 100,000 documents$1,300$135.20
Token cost per document$0.013$0.001352

Use billed output usage rather than estimating from the visible JSON alone. The model documentation lists reasoning-token support, so a visible response may not represent all output usage. Confirm how the route reports and bills usage. This estimate excludes non-token charges, taxes, storage, validation infrastructure and any tool charges; their absence from the calculation does not mean they are free.

Add a retry allowance

If 5% of the original documents require one additional full-size request, that is 5,000 retries, adding 20 million input tokens and 2.5 million output tokens. At the same rates:

Retry costOfficial StandardPublished OneMux rate
Input20 × $2 = $4020 × $0.208 = $4.16
Output2.5 × $10 = $252.5 × $1.04 = $2.60
Added cost$65$6.76
Total including retries$1,365$141.96

A retry that sends validation errors, a larger schema or the previous response can cost more than this allowance. Record retries separately from initial requests and calculate cost per accepted document, not just per API call.

Cache and long-context adjustments

Caching may help when requests share a substantial prefix, such as identical instructions and a schema. Do not assume every repeated token becomes a cache hit: use reported cache usage and the applicable retention terms. OpenAI's documentation lists these short-context prices; the OneMux figures are from the dated catalogue snapshot.

Cache category, per 1 million tokensOfficial StandardPublished OneMux rate
Cached input read$0.10$0.0104
Cache write, 30-minute retention$2.50$0.26
Cache write, 12-hour retention$5.00$0.52

For scale, 1 million cached input read tokens cost $0.10 at the listed official short-context rate or $0.0104 at the listed OneMux rate. Account for cache writes and ordinary uncached input separately; do not also charge the same read tokens as ordinary input in the estimate. Above 272K input tokens, the supplied pricing lists doubled cache rates for the full request. Eligibility and actual cache usage still need verification.

For a long-document example, assume one request has 300,000 input tokens and 1,000 output tokens, with no cache. The official cost is 0.3 × $4 + 0.001 × $15 = $1.215. At the published OneMux tier rates, it is 0.3 × $0.416 + 0.001 × $1.56 = $0.12636. Both use the higher tier for the entire request. Splitting a document can avoid that tier, but may add repeated instructions, extra outputs and reconciliation work; test whether the extraction still works across chunk boundaries.

OpenAI also documents Batch at 50% of Standard rates and higher-priced Fast and Ultrafast modes. Those are official processing-tier terms, not an assumption that the same options or multipliers apply through OneMux. Confirm availability, deadlines and billing before using them in a comparison.

Put schema validation into the budget

GPT-6.2 Sol is documented as supporting structured outputs and text input and output. A practical extraction request should define required fields, permitted types and a representation for missing values, then validate the returned JSON against the same schema before accepting it. The model documentation also says requests setting reasoning effort to none are rejected. Endpoint and parameter support should be verified for the route you use; OpenAI-compatible access alone is not proof that every feature is available.

A valid object can still contain an incorrect date, a guessed value or a field copied from the wrong part of a document. For an illustrative pilot, retain a labelled sample and track:

  • Input and billed output token distributions, including long-tail documents.
  • Schema validation failures, incomplete responses and transport errors.
  • Field-level correctness and missing-value handling against the labelled sample.
  • Retry count, retry token usage and final acceptance rate.
  • Reported cache reads and writes, separated by retention and context tier.

If failures cluster around a field, revise its definition or add a review path rather than blindly retrying. If output usage is unexpectedly high, inspect reported reasoning and output usage where available; do not assume the JSON length alone explains the bill. Image inputs are supported by the model, but this text-token example does not establish image-processing costs.

Conclusion

Start with measured tokens per accepted document, apply the rate for each request's context tier, then add observed retry and cache usage. The worked example is a planning baseline; validation quality, billing details and current prices determine whether it fits your workload.

Sources

Published price snapshot

Captured 2026-11-18T10:00:06.394Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.

ModelOfficial inputOfficial outputOneMux inputOneMux outputPublished price ratio
GPT 6.2 Sol$2$10$0.208$1.040.104

Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.

FAQ

How much does GPT 6.2 Sol cost for 100,000 structured extraction requests?

With 4,000 input and 500 output tokens per request, no caching and no retries, the illustrative cost is $1,300 at official Standard rates or $135.20 at the OneMux catalogue rates captured November 18, 2026. Actual usage and billing conditions may differ.

Does JSON schema validation guarantee extracted data is correct?

No. A response can satisfy a schema while containing incorrect or unsupported values. Validate the structure and separately assess field-level correctness against labelled examples.

When do GPT 6.2 Sol long-context prices apply?

According to the supplied OpenAI model documentation, requests with more than 272K input tokens use higher input, cache and output rates for the full request.

Related articles