GPT Image 2.6 Sunburst API Costs: Estimate an Incident-Diagnosis Workload
A reproducible way to estimate GPT Image 2.6 Sunburst costs for visual incident reports and investigate discrepancies between expected and observed API spend.
Summary · TL;DR
A worked, illustrative budget for generating visual incident reports, plus a checklist for diagnosing failed requests and unexpected costs. The available OneMux catalogue snapshot does not provide usable input or output prices for Sunburst.
Key Takeaways
- Using the source-reported rates and hypothetical usage, one image request with 120 text-input tokens and 1,000 image-output tokens costs $0.0306 before other charges.
- At an assumed 80% acceptance rate, 100 usable outputs require an expected 125 attempts, or $3.825 under the example assumptions.
- The OneMux snapshot lists Sunburst prices as unknown; its published ratio cannot by itself establish a OneMux dollar price.
- Separate request failures, returned but unusable images, missing usage, and billing discrepancies when investigating an incident.
On this page (8)
The decision: budget per usable incident image, not per request
For an incident-diagnosis workflow that generates annotated visual summaries from screenshots, estimate both the cost of each attempt and the number of attempts needed to obtain an acceptable image. Under the illustrative assumptions below, 100 accepted images cost $4.849 when each attempt includes a reference image and the acceptance rate is 80%. This is an arithmetic example, not a measured GPT Image 2.6 Sunburst bill.
OneMux publishes this article and provides access to AI models through an OpenAI-compatible API. Its available price snapshot does not contain usable Sunburst input or output prices, so the example uses separately reported official rates—not an assumed OneMux rate. Confirm current prices and endpoint support before budgeting a production workload.
Price evidence and units
The source pricing guide reports the following OpenAI rates for Sunburst, checked by its publisher on November 5, 2026. They are dollars per million tokens, not dollars per image. The guide says its examples were calculations rather than paid generation tests.
| Usage category | Source-reported official price | Unit |
|---|---|---|
| Text input | $5.00 | Per 1 million tokens |
| Cached text input | $1.25 | Per 1 million tokens |
| Image input | $8.00 | Per 1 million tokens |
| Cached image input | $2.00 | Per 1 million tokens |
| Image output | $30.00 | Per 1 million tokens |
The OneMux published catalogue snapshot was captured on November 12, 2026, at 10:00 UTC. Its official-price fields are unknown, even though the external source reports the rates above. The two records should not be conflated.
| Model | Official input in OneMux snapshot | Official output in OneMux snapshot | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| GPT Image 2.6 Sunburst | Unknown | Unknown | Unknown | Unknown | 0.11699999999999999 |
The ratio is reproduced as published; without corresponding usable prices and units, it is not enough to calculate a OneMux charge or claim a specific saving. Check the Sunburst model page and current OneMux pricing for applicable terms. Unknown prices are not zero.
The source lists cache rates but does not establish that a particular 2.6 request will receive them. The OneMux snapshot supplies no cache prices or tier details. The calculations below therefore assume no cache discount and no additional tier-based charge.
Worked estimate: 100 usable incident summaries
Suppose an operations team wants images that visually summarize API failures using a supplied dashboard screenshot. An acceptable result must preserve the relevant labels and time range and must not introduce misleading incident details. A successful HTTP response alone does not meet that acceptance test.
Use these hypothetical, per-attempt inputs:
- 120 text-input tokens for instructions.
- 1,024 image-input tokens for the reference screenshot.
- 1,000 image-output tokens for the generated image.
- An 80% acceptance rate, with one generated image per attempt.
- No confirmed cache discount, separate model charge, or other fee.
| Component | Calculation | Cost per attempt |
|---|---|---|
| Text input | 120 × $5 / 1,000,000 | $0.000600 |
| Image input | 1,024 × $8 / 1,000,000 | $0.008192 |
| Image output | 1,000 × $30 / 1,000,000 | $0.030000 |
| Total | Sum of the three components | $0.038792 |
At an 80% acceptance rate, 100 / 0.8 = 125 expected attempts. At $0.038792 per attempt, the expected total is $4.849, or $0.04849 per accepted image. At a 50% acceptance rate, the same assumptions yield 200 attempts and $7.7584.
These are expected values, not a promise that any particular batch will hit its target. They also exclude charges for failed requests because the supplied source does not establish how a provider bills every failure. Verify that policy and observed charges separately. Output token consumption, image dimensions, quality, reference inputs, and retries may change the real result.
Diagnose an incident without confusing failure signals
Record one row per attempt, including rejected outputs. Keep sensitive screenshots, credentials, and incident data out of shared logs. Where the API exposes them, capture a request or correlation ID, timestamp, model and endpoint, image parameters, response status, latency, usage breakdown, and an acceptance reason. Record the billed amount separately when it becomes available.
| Observable signal | What it establishes | Next check |
|---|---|---|
| Authentication or permission error | The request was not authorized on that path | Check the provider, credentials, project access, and exact model ID; do not paste keys into tickets. |
| Rate-limit response | The service rejected or limited that attempt | Check the applicable account limits and retry guidance; distinguish retries from original requests in the log. |
| Timeout or connection failure | The client did not receive a normal response | Correlate request IDs and provider records before retrying; a client timeout alone does not establish whether work completed or was billed. |
| Successful response, unusable image | The API returned an output, but the task failed acceptance | Log the rejection reason and count the attempt in cost per accepted image. Do not call it an HTTP failure. |
| Missing or incomplete usage breakdown | Token-category cost cannot be independently reconstructed | Mark the missing category unknown and compare with the account's billing record; do not classify all input as text. |
| Higher spend than forecast | The estimate and recorded spend differ | Compare attempt count, retries, input-image usage, output usage, applicable rates, and any separately billed work. |
When a response contains both total input usage and category breakdowns, use the breakdown to allocate that total; do not add the total and its components together. Likewise, only apply a cached rate to usage confirmed as cached, rather than counting those tokens again at the uncached rate.
Run a controlled pilot before scaling
- Confirm that your chosen provider supports the exact model, endpoint, and parameters needed for image generation and reference-image input. OneMux's OpenAI-compatible interface does not by itself establish support for every endpoint or parameter; this integration has not been tested for this article.
- Set a small spending limit and choose fixed image dimensions, quality, and input count where the documented interface permits them. Avoid changing several variables at once.
- Run a limited set of representative incident screenshots. Define acceptance before reviewing results, including whether labels, time ranges, and visual relationships remain accurate.
- Reconcile request counts and returned usage with actual charges. Track unknowns rather than filling gaps with assumed zeroes.
- Recalculate cost per accepted image from observed spend and acceptance. Investigate timeouts and retries separately before attributing an increase to model pricing.
This method estimates static-image work only. The source says GIF and SVG tasks have distinct cost considerations; it does not establish a universal GIF frame multiplier or a single SVG writing-model rate. Budget those deliverables from their own usage and billing evidence.
Conclusion
Sunburst's reported token rates make a reproducible estimate possible, but they do not fix the price of an image. For incident workflows, acceptance rate, screenshot input, retry behavior, and observable usage determine whether a forecast is useful. Treat the OneMux price as unknown until current, applicable rates are available.
Sources
- Ofox: GPT Image 2.6 API pricing, image budgets, GIF and SVG billing — source-reported rates and limitations, checked by its publisher on November 5, 2026.
- OneMux GPT Image 2.6 Sunburst model page and OneMux pricing — relevant catalogue and current pricing references; the supplied snapshot was captured November 12, 2026.
Published price snapshot
Captured 2026-11-12T10:00:05.759Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| GPT Image 2.6 Sunburst | Unknown | Unknown | Unknown | Unknown | 0.11699999999999999 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does GPT Image 2.6 Sunburst cost per image?
There is no fixed per-image cost established by the supplied evidence. Using source-reported rates and hypothetical usage of 120 text-input tokens, 1,024 image-input tokens, and 1,000 image-output tokens, one attempt costs $0.038792 before other charges.
Can I calculate the OneMux price from the published ratio?
No. The supplied OneMux snapshot lists Sunburst input and output prices as unknown. The ratio alone does not establish a dollar price or a verified saving.
Does an HTTP 200 response mean an incident image is usable?
No. It indicates a successful response, not that the image preserves the required labels, time range, or other incident details. Record acceptance separately from request status.
Should I assume failed or timed-out requests are free?
No. A client-side timeout does not establish whether the provider completed or billed the work. Check provider policy, request identifiers, and billing records.
Related articles
Guides
Gemini 3.1 Flash Image API Costs: A Workload Estimate and Incident Checklist
Estimate Gemini 3.1 Flash Image preview API spend with explicit token assumptions, then use request-level signals to investigate cost and reliability incidents.
Guides
GPT Image 2.5 API Costs: Estimate a Workload and Diagnose Billing Incidents
A reproducible GPT Image 2.5 workload estimate, with a practical checklist for diagnosing cost and request anomalies.
Guides
GPT 6.2 Sol API Costs for Incident Diagnosis: A Reproducible Estimate
Estimate GPT 6.2 Sol token costs for API incident diagnosis using explicit workload assumptions, context tiers, retries, and cache scenarios.
Guides
Grok Imagine Image API costs: estimate image workloads and diagnose spend spikes
Estimate Grok Imagine Image costs per generated image, reconcile missing token prices, and investigate API incidents using observable signals.