GPT Image 2.6 Sunburst API Costs: A Privacy-Aware Workload Estimate
Estimate GPT Image 2.6 Sunburst costs with comparable token rates, explicit retry assumptions, and a privacy-conscious pilot checklist.
Summary · TL;DR
Use separate text-input, image-input, and image-output rates to estimate a Sunburst workload, then adjust for rejected results. OneMux prices are unknown in the supplied snapshot and must be confirmed before forecasting a routed workload.
Key Takeaways
- The source reports direct OpenAI rates of $5 per million text input tokens, $8 per million image input tokens, and $30 per million image output tokens; these are not OneMux prices.
- An illustrative request with 120 text input tokens and 1,000 image output tokens costs $0.0306 at those rates, before reference images or other model charges.
- At an assumed 80% acceptance rate, 100 accepted images require an expected 125 attempts, costing $3.825 in the example.
- Minimize sensitive inputs and protect credentials, but verify provider retention and access terms rather than assuming a routing layer guarantees privacy.
On this page (8)
The decision: estimate a pilot before committing a budget
For GPT Image 2.6 Sunburst, start with separate estimates for text input, reference-image input, and image output. Then budget for attempts that produce unusable results. A per-image quote alone cannot tell you what a workload will cost when reference images, output settings, and retries differ.
For a privacy-sensitive workflow, use representative non-sensitive test material first. Move to real user data only after checking the applicable provider terms and your own authorization and retention requirements.
This is a cost guide from OneMux, the publisher and product discussed here. OneMux provides access to models through an OpenAI-compatible API, but the supplied OneMux price snapshot does not contain usable Sunburst input or output prices. The dollar examples below therefore use reported direct OpenAI rates, not OneMux charges. They are illustrative calculations, not paid test results.
Sunburst pricing: keep providers and units separate
The Ofox pricing guide, checked by its publisher on November 5, 2026, reports the following direct OpenAI rates for Sunburst. Its rate claims are source-reported here; check current provider pricing before funding a batch.
| Billing category | Reported direct OpenAI price | OneMux price in snapshot | Unit |
|---|---|---|---|
| Text input | $5.00 | Unknown | Per 1 million tokens |
| Image input | $8.00 | Unknown | Per 1 million tokens |
| Image output | $30.00 | Unknown | Per 1 million tokens |
| Cached text input | $1.25 | Unknown | Per 1 million tokens |
| Cached image input | $2.00 | Unknown | Per 1 million tokens |
The OneMux catalogue snapshot was captured on November 13, 2026, at 10:30:06 UTC. Its Sunburst entry lists official and OneMux input and output prices as unknown and a published price ratio of 0.11699999999999999. The snapshot does not provide enough matching price information to turn that ratio into a dollar estimate or a verified percentage saving for this workload. Unknown is not zero.
The source also reports the same direct OpenAI token rates for GPT Image 2.6 Flare. That is a comparison of rates, not evidence that Flare and Sunburst use the same number of tokens or produce equivalent results. Check the Sunburst model page and current OneMux pricing for available details and applicable conditions before estimating a OneMux bill.
The Ofox guide lists cached rates but does not establish that Sunburst requests receive them. Exclude cache savings until your route's usage or billing records confirm eligibility and actual cached usage. Likewise, do not assume a tier price applies without checking its conditions.
Calculate a request and an accepted-image budget
Assume one attempt uses 120 text input tokens, no image input, and 1,000 image output tokens. Also assume no confirmed cache discount and no separate authoring or conversational model charge. These token counts are hypothetical; they are not a prediction of Sunburst consumption.
| Component | Calculation at reported direct OpenAI rates | Illustrative cost |
|---|---|---|
| Text input | 120 tokens at $5 per million | $0.0006 |
| Image input | None in this example | $0.0000 |
| Image output | 1,000 tokens at $30 per million | $0.0300 |
| Total per attempt | Text input plus image output | $0.0306 |
If the attempt also uses 1,024 image input tokens, that input adds $0.008192 at $8 per million. The example total becomes $0.038792 per attempt. Keep text and image inputs separate; an aggregate input total should not be added again on top of its component breakdown.
Now suppose a pilot shows that 80% of outputs meet your acceptance rule and that every attempt costs the first example's $0.0306. To obtain 100 accepted images, plan for an expected 125 attempts: 100 divided by 0.8. The illustrative generation budget is 125 × $0.0306 = $3.825. At a 50% acceptance rate, the same assumptions yield 200 attempts and $6.12.
These are expected values, not spending caps. Actual attempts and token usage can vary. Define acceptance before the pilot—for example, whether text is legible, the layout is correct, and no sensitive information appears in an unintended location. A successful API response is not necessarily an acceptable image; a discarded generated output may still contribute to the bill. This does not establish how a provider charges for failed HTTP requests.
Run a privacy-aware pilot
Before submitting real user material, establish what data is necessary for the image task and who is authorized to send it. A useful pilot record can support cost analysis without becoming a second repository of user content.
- Prepare sanitized inputs. Replace real names, identifiers, documents, and recognizable reference images with synthetic or approved test material where possible. Review prompts as well as images: either can contain personal data.
- Confirm the route. Verify access to the exact model and the endpoint and parameters documented by the provider you will call. OneMux's OpenAI-compatible API does not by itself establish support for every endpoint or parameter. No OneMux integration was tested for this article.
- Protect credentials. Keep API keys on a trusted server or in an approved secret manager, not in browser code, prompts, screenshots, or shared logs. Use separate credentials for separate providers and environments; restrict access and rotate exposed keys.
- Limit the first batch. Set a small spending limit where available, choose explicit output settings, and use a fixed acceptance checklist. Record attempts as well as accepted results.
- Log usage, not unnecessary content. Record the model, provider, settings, token breakdown when available, charge, and acceptance outcome. Avoid storing raw prompts, reference images, outputs, or credentials in general-purpose logs unless there is a justified need and an approved retention policy.
- Reconcile and decide. Compare the estimate with actual usage and billed charges. Investigate missing usage details rather than treating all input tokens as text. Expand only after the privacy review and the cost per accepted result are satisfactory.
Check the relevant providers' current data handling, retention, and access terms for your actual route. Do not assume that removing data from your own logs changes what a provider receives or retains.
Where the estimate can fail
Reference images: A small text prompt can accompany substantial image input. Omitting that category understates the example cost. Minimize reference material for privacy and practicality, but measure the effect on acceptance rather than assuming fewer inputs always mean a lower cost per usable result.
GIF and SVG deliverables: The Ofox guide says GIF workload depends on details such as frames and dimensions; it does not establish that multiplying a still-image estimate by frame count is a valid billing formula. It also identifies a separate authoring-model component for SVG. Record actual usage and applicable charges for each component instead of applying the image-output rate to the whole job.
Missing or changed prices: The examples are not a OneMux quote, and reported direct rates may change. If a provider supplies only an aggregate usage figure or an unclear charge, preserve that uncertainty until its documentation or billing detail resolves it.
Conclusion
Use the token calculation as a starting point, then make the decision on measured cost per accepted result and an approved data-handling process. For OneMux, obtain current, applicable Sunburst prices and confirm endpoint support before converting this direct-API illustration into a routed-workload forecast.
Sources
- Ofox: GPT Image 2.6 API pricing — source-reported direct OpenAI rates, access considerations, and GIF/SVG billing caveats; checked by Ofox on November 5, 2026.
- OneMux GPT Image 2.6 Sunburst model page and OneMux pricing — relevant product and current pricing references. The catalogue snapshot used in this article was captured November 13, 2026.
Published price snapshot
Captured 2026-11-13T10:30:06.217Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| GPT Image 2.6 Sunburst | Unknown | Unknown | Unknown | Unknown | 0.11699999999999999 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does one GPT Image 2.6 Sunburst image cost?
There is no single cost established by the supplied rates. In one hypothetical direct OpenAI example, 120 text input tokens and 1,000 image output tokens cost $0.0306, excluding reference images, confirmed cache discounts, and other model charges. Actual usage can differ.
Can I use the direct OpenAI estimate as a OneMux quote?
No. The supplied OneMux snapshot lists Sunburst input and output prices as unknown. Confirm current applicable OneMux prices and billing units before estimating a OneMux workload.
Does using an API router guarantee private handling of user images?
No such guarantee is established by the supplied information. Minimize sensitive inputs, protect credentials, and review the data handling and retention terms applicable to your chosen route.
Related articles
Guides
Grok Imagine Image 2.0 API costs: a privacy-aware workload estimate
Estimate image-input and output charges for Grok Imagine Image 2.0 with reproducible workload assumptions and a privacy checklist.
Guides
Gemini 3 Pro Image Preview API costs: a privacy-aware workload estimate
Estimate a Gemini 3 Pro Image Preview workload using explicit token assumptions, and plan privacy controls without mistaking an illustrative estimate for a quoted image bill.
Guides
Grok Imagine Image API costs: a reproducible evaluation budget
Estimate Grok Imagine Image workload costs with explicit per-image assumptions, repeatable test cases, and spending limits.
Guides
Gemini 3.1 Flash Image API costs: a repeatable evaluation budget
Estimate the cost of a bounded Gemini 3.1 Flash Image evaluation using explicit token assumptions, image-price caveats, and reproducible test cases.