Hy4 Preview API Cost Guide for Incident Diagnosis
Estimate Hy4 Preview costs for API incident diagnosis using explicit token assumptions, comparable prices, and reproducible examples.
Summary · TL;DR
An illustrative cost model for using Hy4 Preview to analyze observable API failure signals, with price comparisons, cache assumptions, and a practical incident-triage checklist.
Key Takeaways
- At the stated assumptions, 10,000 incident-diagnosis requests would cost an illustrative $25.8804 at the listed OneMux input and output rates, before retries or caching.
- The Venice source publishes a separate price pair; its billing definitions should be verified before treating a comparison as definitive.
- Estimate using observed token usage and all billable attempts, not only successful diagnoses.
- A large context window does not make sending an entire incident log necessary or cost-free.
On this page (9)
The decision: budget by diagnostic attempt, not incident count
For a workload of 10,000 Hy4 Preview diagnostic requests, each with 8,000 input tokens and 1,000 output tokens, the illustrative cost is $25.8804 at OneMux’s listed rates, assuming those rates apply per million tokens and no cache, tiers, or extra charges apply. That is about $0.002588 per request. An incident requiring several attempts costs proportionally more.
This is a cost model, not a measured result. OneMux, the publisher of this guide, offers model access through an OpenAI-compatible API and provides spend visibility. Before committing a budget, verify the current billing units and conditions, then replace the example token counts with usage from your own incident-diagnosis workload.
Hy4 Preview prices and comparable units
The following OneMux catalogue snapshot was captured on November 17, 2026. The supplied catalogue lists the amounts below but does not explicitly state their token denominator. The calculations in this article therefore assume USD per 1 million tokens; confirm that unit and any applicable conditions on the current model and pricing pages before using the estimate for purchasing.
| Model | Catalogue official input | Catalogue official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| Hy4 Preview | $0.86 | $2.6 | $0.23478 | $0.7098 | 0.273 |
The published ratio is 0.273, not a percentage discount; it corresponds arithmetically to 72.7% less than the listed official amounts when the same units and conditions apply. The supplied snapshot lists no tier details, so it does not establish whether tiered billing applies. Unknown conditions are not zero-cost conditions.
The separately supplied Venice Hy4 Preview documentation publishes a price pair of $1.04 / $3.13 per million for its standard private variant. That is a different provider’s price, not the catalogue’s official price. The supplied source summary does not explicitly label which member of the pair is input versus output; verify Venice’s billing definitions before comparing an invoice or treating the example below as a firm quote. Prices can change.
A reproducible incident-diagnosis estimate
Assume a service sends a model a compact incident packet: the affected endpoint, a time window, HTTP status counts, latency changes, selected error messages, and recent deployment information. The model returns likely explanations, evidence gaps, and suggested checks. This example assumes:
- 10,000 billable requests in the period, with one attempt per request.
- 8,000 input tokens and 1,000 output tokens per attempt, or 80 million input and 10 million output tokens in total.
- No cached tokens, volume tiers, taxes, or other charges; no allowance for failed billable attempts.
- All output counted in the example is billable output. Check how the provider accounts for reasoning tokens if reasoning is enabled.
| Price basis | Input calculation | Output calculation | Illustrative total |
|---|---|---|---|
| OneMux catalogue | 80 × $0.23478 = $18.7824 | 10 × $0.7098 = $7.098 | $25.8804 |
| Catalogue official | 80 × $0.86 = $68.80 | 10 × $2.6 = $26.00 | $94.80 |
| Venice, conditional interpretation | 80 × $1.04 = $83.20 | 10 × $3.13 = $31.30 | $114.50 |
The Venice row assumes, solely for illustration, that the first published price is input and the second is output. Do not use that row as a definitive provider comparison until the ordering and billing conditions are confirmed. The arithmetic compares prices, not diagnostic quality, latency, privacy equivalence, or service reliability; those outcomes have not been measured here.
Account for retries and cache reads
If 10% of the original 10,000 requests each need one additional attempt of the same size, there are 11,000 billable attempts. Under the same OneMux assumptions, the estimate increases by 10%, from $25.8804 to $28.46844. Actual retries may use different token counts, and a failed request may or may not be billed; check provider policy and usage records.
The snapshot also lists a OneMux cache-read price of $0.012285 and an official cache-read price of $0.045. Their denominator and eligibility conditions should likewise be confirmed. As a hypothetical sensitivity check only, suppose the OneMux cache-read amount is per million tokens, 60 million of the 80 million input tokens qualify at that rate, and the remaining 20 million are billed at the normal input rate. With the same 10 million output tokens, the calculation is:
- Uncached input: 20 × $0.23478 = $4.6956.
- Cache reads: 60 × $0.012285 = $0.7371.
- Output: 10 × $0.7098 = $7.098.
- Total: $12.5307, before any other applicable charges.
This is not a prediction of cache hit rate. Cache writes, minimum sizes, expiry, supported request shapes, and other conditions are unknown from the supplied snapshot. Do not assume cached input is free or that a repeated prompt will qualify.
Build a useful diagnostic packet
Start with observable signals rather than a request to “find the root cause.” For each attempt, include the incident time window and timezone; endpoint and environment; request volume; status-code and error-type counts; latency percentiles if available; a few representative, sanitized log lines; and relevant changes with timestamps. State which signals are missing. Remove credentials, personal information, and unnecessary payloads before sending data to any external API.
Ask for a short response with three parts: observations, plausible hypotheses with supporting or contradicting evidence, and next checks. Require the model to distinguish an observed 5xx spike from an inferred cause, for example. A hypothesis is not a confirmed diagnosis; use logs, traces, metrics, and deployment records to verify it.
Record actual input and output usage for each attempt alongside whether the response was useful, required another attempt, or could not be verified. Track these by incident and prompt version. This exposes a common cost failure: a low per-request estimate that omits repeated attempts, oversized log excerpts, or lengthy answers. If requests grow expensive, first remove duplicate evidence and cap the requested answer length; then check whether the shorter packet still contains enough information to investigate.
Model limits and integration checks
The Venice source describes Hy4 Preview as Tencent Hunyuan’s mixture-of-experts model with a 1 million-token context window and a 64,000-token maximum output on that service. It also documents none, low, and high reasoning-effort options there. Those are documented specifications, not evidence of incident-diagnosis accuracy or speed, and they do not establish identical limits or parameter support through every provider.
The same source shows a Venice chat-completions endpoint using model ID hy4-preview and describes its service as private with zero data retention. Do not transfer that privacy claim automatically to another route. OneMux offers an OpenAI-compatible API, but use of a particular endpoint, model identifier, or parameter is conditional on its documented support. Verify those details and the applicable data-handling terms before sending incident data. No OneMux integration or paid evaluation was tested for this article.
Conclusion
Use $25.8804 as an illustrative starting point for the specified 10,000-attempt workload—not as a quote. Confirm units and billing conditions, measure real token usage and retries, and evaluate whether the model’s hypotheses lead to verifiable checks. A smaller, well-structured evidence packet can make both the estimate and the investigation easier to manage.
Sources
- Venice Hy4 Preview API documentation, pinned revision: model specifications, service description, example request, and published price pair.
- OneMux Hy4 Preview model page: catalogue price snapshot and model listing; snapshot captured November 17, 2026.
Published price snapshot
Captured 2026-11-17T08:30:05.988Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| Hy4 Preview | $0.86 | $2.6 | $0.23478 | $0.7098 | 0.273 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does Hy4 Preview cost for API incident diagnosis?
In the illustrative workload, 10,000 attempts using 8,000 input and 1,000 output tokens each cost $25.8804 at the listed OneMux rates, assuming those rates are per million tokens and excluding caching, retries, tiers, and other charges.
Are cached Hy4 Preview input tokens free?
The supplied OneMux catalogue lists a nonzero cache-read price of $0.012285. Confirm its billing unit and eligibility conditions before using it in a budget; cache-write charges and other conditions are not established by the snapshot.
Can Hy4 Preview confirm the root cause of an API incident?
The supplied documentation does not establish measured incident-diagnosis accuracy. Treat model explanations as hypotheses and verify them against observable logs, traces, metrics, and change records.
Related articles
Guides
Gemini 3.1 Flash Image API Costs: A Workload Estimate and Incident Checklist
Estimate Gemini 3.1 Flash Image preview API spend with explicit token assumptions, then use request-level signals to investigate cost and reliability incidents.
Guides
GPT Image 2.5 API Costs: Estimate a Workload and Diagnose Billing Incidents
A reproducible GPT Image 2.5 workload estimate, with a practical checklist for diagnosing cost and request anomalies.
Guides
GPT 6.2 Sol API Costs for Incident Diagnosis: A Reproducible Estimate
Estimate GPT 6.2 Sol token costs for API incident diagnosis using explicit workload assumptions, context tiers, retries, and cache scenarios.
Guides
Grok Imagine Image API costs: estimate image workloads and diagnose spend spikes
Estimate Grok Imagine Image costs per generated image, reconcile missing token prices, and investigate API incidents using observable signals.