Kimi K3.1 Pro API costs for incident diagnosis: a reproducible estimate
Estimate Kimi K3.1 Pro API costs for diagnosing incidents from logs and metrics, with explicit token, cache, and tier assumptions.
Summary · TL;DR
An illustrative workload of 1,000 incident-diagnosis requests per day, each using 10,000 input tokens and 1,000 output tokens, costs $30 per day at the cited official standard rates or $8.97 at the OneMux catalogue rates, before cache charges. Actual costs depend on measured usage, cache billing, retries, and the selected tier.
Key Takeaways
- Compare prices per million input and output tokens, then apply your own measured token mix.
- At the November 12, 2026 catalogue snapshot, the published OneMux-to-official price ratio was 0.299 for standard input and output, and 0.546 for Highspeed.
- Cache reads can reduce repeated-input costs, but cache writes must be counted separately under the applicable billing rules.
- For incident diagnosis, evaluate whether the model identifies evidence, uncertainty, and useful next checks—not just whether it returns an answer.
On this page (8)
The decision in brief
For an illustrative incident-diagnosis workload of 1,000 requests a day, each with 10,000 input tokens and 1,000 output tokens, Kimi K3.1 Pro costs $30 a day at the cited official standard rates or $8.97 a day at the OneMux standard rates in the November 12, 2026 catalogue snapshot. Those figures assume uncached traffic, no retries, and no other charges.
OneMux is the publisher of this article and the product compared with Moonshot's official API. The estimate is not a quote or a performance test. Before choosing a route, measure token usage on representative incidents, check current billing terms, and evaluate whether the diagnostic output is useful to your responders.
Price snapshot: use matching token units
All rates below are USD per million tokens. The OneMux catalogue snapshot was captured on November 12, 2026. The official rates are also described in Mercatus's October 25, 2026 pricing article; verify current rates before committing spend.
| Route | Official input | Official output | OneMux input | OneMux output | Published OneMux-to-official ratio |
|---|---|---|---|---|---|
| Kimi K3.1 Pro standard | $2.00 | $10.00 | $0.598 | $2.99 | 0.299 |
| Kimi K3.1 Pro Highspeed | $4.00 | $20.00 | $2.184 | $10.92 | 0.546 |
The ratio compares the published input rate with its official counterpart; the same ratio applies to output for each row. It is a price ratio, not a promise that an invoice will be reduced by a particular percentage. The OneMux model page and Highspeed page are the relevant catalogue references.
Mercatus describes Highspeed as the same model at higher rates and reports Moonshot's speed claim, but that claim is not a measurement of your incident workflow. Choose the tier using observed end-to-end latency and the operational value of a faster response, not price or provider throughput claims alone.
Work through a daily incident workload
Imagine an on-call workflow that sends a redacted error summary, recent metrics, selected log lines, and a runbook excerpt to the model. The model returns a short diagnosis, supporting evidence, uncertainty, and proposed checks. The following numbers are illustrative, not measured:
- 1,000 requests per day, including follow-up analyses.
- 10,000 input tokens and 1,000 output tokens per request.
- No cache reads or writes, retries, taxes, or other fees.
- The same token counts on each route; 365 days per year for the annual estimate.
That is 10 million input tokens and 1 million output tokens per day. Multiply each volume in millions by its corresponding rate, then add the results:
| Route | Daily input cost | Daily output cost | Daily total | Annual total |
|---|---|---|---|---|
| Official standard | 10 × $2.00 = $20.00 | 1 × $10.00 = $10.00 | $30.00 | $10,950.00 |
| OneMux standard | 10 × $0.598 = $5.98 | 1 × $2.99 = $2.99 | $8.97 | $3,274.05 |
| Official Highspeed | 10 × $4.00 = $40.00 | 1 × $20.00 = $20.00 | $60.00 | $21,900.00 |
| OneMux Highspeed | 10 × $2.184 = $21.84 | 1 × $10.92 = $10.92 | $32.76 | $11,957.40 |
Annual totals simply multiply the daily cost by 365; they do not predict incident volume. Output matters here: even though it is only one-tenth of the token volume, it contributes one-third of each total because the output rate is five times the input rate.
Mercatus reports that Kimi K3.1 Pro has thinking enabled and that reasoning effort affects the request. Do not assume every diagnosis produces 1,000 billable output tokens: use the provider's usage records, including any reasoning tokens billed as output under its terms. Set an appropriate output limit and test whether shorter responses still contain the evidence responders need.
Account for cache reads and writes separately
Incident requests may repeat a runbook or service description while changing the logs and metrics. Cache economics depend on what is actually reused, the provider's eligibility rules, and the entry lifetime. The published snapshot lists these standard-tier rates per million tokens:
| Token charge | Official | OneMux |
|---|---|---|
| Ordinary input | $2.00 | $0.598 |
| Cache read | $0.20 | $0.0598 |
| Cache write, five-minute TTL | $2.00 | $0.598 |
| Cache write, one-hour TTL | $4.00 | $1.196 |
| Output | $10.00 | $2.99 |
For a second illustration, suppose the same daily workload has 4 million ordinary input tokens, 6 million cache-read tokens, and 1 million output tokens. Treat those input categories as non-overlapping and exclude cache writes for the moment:
- Official standard: (4 × $2.00) + (6 × $0.20) + (1 × $10.00) = $19.20 per day.
- OneMux standard: (4 × $0.598) + (6 × $0.0598) + (1 × $2.99) = $5.7408 per day.
If the bill also includes 1 million separately charged five-minute cache-write tokens, add $2.00 officially or $0.598 on OneMux: the illustrative totals become $21.20 and $6.3388, respectively. Whether writes are charged separately from other input, and which tokens qualify, must be checked against the route's current billing terms. Do not add a hypothetical write charge to an estimate that already includes those same tokens as billed writes.
Make the estimate reflect incident diagnosis
A useful cost test starts with a small, representative set of historical incidents that your organization is permitted to use. Do not send secrets, customer data, or raw logs to an API without the appropriate authorization and redaction controls.
- Define observable signals. Include timestamps, error-rate changes, status codes, latency, deployment events, and a bounded selection of log lines where available. Label missing signals rather than inventing them.
- Ask for auditable output. Request a ranked hypothesis, the specific supplied evidence for it, competing explanations, and the next safe check. Require the model to say when the evidence is insufficient.
- Record usage and outcomes. For each request, retain input and output token counts, cache usage, tier, retries, latency, and whether a reviewer found the proposed check useful. Track cost per reviewed incident as well as cost per request.
- Test failure cases. Include ambiguous symptoms, contradictory timestamps, and an incident whose cause is absent from the supplied evidence. A confident but unsupported diagnosis is an operational failure even if it is inexpensive.
- Recalculate with actual traffic. Use observed daily token totals and billed cache categories, not character counts or the illustrative averages above. Account for follow-ups and failed or retried requests according to the provider's billing terms.
OneMux provides access to models through an OpenAI-compatible API, with routing and spend visibility. Whether a particular integration works depends on the documented endpoint and parameter support; this article does not claim an integration or evaluation was tested. You can also call the official API directly and apply the same measurement checklist.
Conclusion
Start with the standard tier, a bounded diagnostic prompt, and a cost estimate based on measured tokens. Move to Highspeed only if observed response time justifies its higher rate. Treat cache savings as conditional on actual reusable input and billed writes, and judge the model's incident advice against evidence—not its confidence.
Sources
- Mercatus: Kimi K3.1 Pro API pricing, dated October 25, 2026, for the reported official rates, cache terms, and model-tier details.
- OneMux Kimi K3.1 Pro catalogue and Highspeed catalogue, for the supplied November 12, 2026 price snapshot. Catalogue prices can change.
Published price snapshot
Captured 2026-11-12T19:30:06.264Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| Kimi K3.1 Pro | $2 | $10 | $0.598 | $2.99 | 0.299 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does Kimi K3.1 Pro cost for incident diagnosis?
At the cited standard rates, an illustrative daily workload of 10 million input tokens and 1 million output tokens costs $30 on the official API or $8.97 at the November 12, 2026 OneMux catalogue rates, before cache charges and other fees.
Does caching always make an incident-diagnosis request cheaper?
No. Cache reads have lower listed rates, but writes may incur charges and reused content must meet the route's cache conditions. Calculate reads and writes separately using actual billed usage.
When should an incident workflow use Kimi K3.1 Pro Highspeed?
Consider it when measured end-to-end response time has enough operational value to justify the higher published token rates. The supplied source's speed claim is not a benchmark of your workflow.
Related articles
Guides
Gemini 4 Hydrogen API costs for incident diagnosis: a reproducible estimate
Estimate Gemini 4 Hydrogen token costs for API incident diagnosis, including cache assumptions, retries, and observable failure signals.
Guides
Gemini 3.1 Flash Image API Costs: A Workload Estimate and Incident Checklist
Estimate Gemini 3.1 Flash Image preview API spend with explicit token assumptions, then use request-level signals to investigate cost and reliability incidents.
Guides
GPT Image 2.5 API Costs: Estimate a Workload and Diagnose Billing Incidents
A reproducible GPT Image 2.5 workload estimate, with a practical checklist for diagnosing cost and request anomalies.
Guides
GPT 6.2 Sol API Costs for Incident Diagnosis: A Reproducible Estimate
Estimate GPT 6.2 Sol token costs for API incident diagnosis using explicit workload assumptions, context tiers, retries, and cache scenarios.