Kimi K3.1 Pro Highspeed: Estimate the Cost of Repository Changes and Test Verification
A reproducible cost estimate for repository code changes and test verification using Kimi K3.1 Pro Highspeed, with cache assumptions and a standard-tier comparison.
Summary · TL;DR
An illustrative repository-change task using 200,000 uncached input tokens and 20,000 output tokens costs $1.20 at the published official Highspeed rates or $0.6552 at the OneMux snapshot rates. Actual costs depend on the full agent loop, cache accounting, and successful verification rate.
Key Takeaways
- For the illustrative uncached task, Highspeed costs $1.20 officially and $0.6552 through OneMux at the stated snapshot rates.
- Count repository context, tool results, repeated prompts, generated patches, and any billed reasoning output across every model call—not just the final answer.
- Compare cost per verified change as well as cost per attempt; failed attempts and reruns can materially change the result.
- Cache-write billing and eligibility must be confirmed before applying cache savings to a production forecast.
On this page (9)
The short answer
For an illustrative repository change that consumes 200,000 uncached input tokens and 20,000 output tokens across the entire agent loop, Kimi K3.1 Pro Highspeed costs $1.20 at the published official rates or $0.6552 at the OneMux catalogue rates. At 100 such attempts, the estimates are $120 and $65.52, respectively.
Those are token charges, not a quote for a verified pull request. A workflow that reads more files, retries a patch, or feeds verbose test logs back to the model can cost substantially more. OneMux is the publisher of this article and offers model access through an OpenAI-compatible API; the official API is a separate alternative.
Rates to use in the calculation
The OneMux catalogue snapshot was captured on November 12, 2026. Prices below are in US dollars per 1 million tokens. The published ratio is OneMux price divided by official price, not the percentage discount. Check current OneMux pricing and the relevant provider before budgeting: rates and billing conditions can change.
| Model and route | Input | Output | Published price ratio |
|---|---|---|---|
| Kimi K3.1 Pro Highspeed, official | $4.00 | $20.00 | 1.00 baseline |
| Kimi K3.1 Pro Highspeed, OneMux | $2.184 | $10.92 | 0.5459999999999999 |
| Kimi K3.1 Pro, official | $2.00 | $10.00 | 1.00 baseline |
| Kimi K3.1 Pro, OneMux | $0.598 | $2.99 | 0.299 |
The official Highspeed input and output rates are twice the official standard-tier rates. At the OneMux snapshot rates, Highspeed is about 3.65 times the standard-tier rate for each of those token categories. These are price comparisons, not evidence that the tiers deliver the same result on a particular repository task.
The supplied Mercatus pricing article, last verified October 25, 2026, reports that Highspeed is the same model offered at higher speed, citing Moonshot's claim of two to three times the speed. That is not a measured speed guarantee for your workload. The same source says thinking is always on; include any reasoning tokens that your route bills as output when measuring usage.
Estimate one code change, end to end
This example is illustrative, not a tested run. It represents one attempt to inspect a repository, generate a patch, run tests, and respond to test results. The token totals cover all model calls in that attempt.
| Workload assumption | Tokens per attempt |
|---|---|
| Input: instructions, repository excerpts, repeated context, and test output | 200,000 |
| Output: proposed changes, tool-call content, explanations, and any billed reasoning output | 20,000 |
| Cache reads and writes | None in this baseline |
Using the rates above:
- Official Highspeed: 0.2 million input × $4 + 0.02 million output × $20 = $1.20 per attempt.
- OneMux Highspeed: 0.2 million input × $2.184 + 0.02 million output × $10.92 = $0.6552 per attempt.
- Official standard: 0.2 million input × $2 + 0.02 million output × $10 = $0.60 per attempt.
- OneMux standard: 0.2 million input × $0.598 + 0.02 million output × $2.99 = $0.1794 per attempt.
For 100 attempts at exactly that mix, multiply each per-attempt figure by 100: $120, $65.52, $60, and $17.94, respectively. This excludes test-runner compute, repository hosting, network charges, taxes, and any other non-token fees. It also excludes extra attempts unless they are included in the count.
Budget for verified changes, not just attempts
A completed attempt is not necessarily a verified change. For a planning example, suppose 100 attempts produce 80 changes that pass your chosen tests, with no additional costs beyond the token totals above. The official Highspeed estimate becomes $120 ÷ 80, or $1.50 per verified change; the OneMux estimate becomes $65.52 ÷ 80, or $0.819 per verified change.
The 80% pass rate is an assumption, not a model benchmark. Define verification in advance: for example, the relevant test suite must pass on the proposed patch, and the patch must satisfy review criteria. A passing test suite alone does not establish that a change is correct.
Account for cached repository context separately
A stable instruction block or repeated file prefix may be eligible for caching, but eligibility, lifetime, and billing depend on the route. The source article reports five-minute and one-hour write options for the official API. The snapshot lists these Highspeed cache prices, also per 1 million tokens:
| Cache category | Official Highspeed | OneMux Highspeed |
|---|---|---|
| Cache read | $0.20 | $0.1092 |
| Cache write, five-minute TTL | $4.00 | $2.184 |
| Cache write, one-hour TTL | $8.00 | $4.368 |
Consider a separate hypothetical attempt with 50,000 five-minute write tokens, 150,000 cache-read tokens, and 20,000 output tokens. Assume, solely for this calculation, that the write category replaces an ordinary input charge for those 50,000 tokens and that there are no other input charges.
- Official: 0.05 × $4 + 0.15 × $0.20 + 0.02 × $20 = $0.63.
- OneMux: 0.05 × $2.184 + 0.15 × $0.1092 + 0.02 × $10.92 = $0.34398.
This is not a guaranteed saving over the baseline: the examples assume a particular classification of input tokens. The source describes cache writes as billed separately, so confirm whether your actual route charges a write in addition to ordinary input before using this math. If it does, add the applicable ordinary-input charge. A longer TTL, cache misses, changed prefixes, or runs separated beyond the TTL can also raise the bill.
Measure your own repository workflow
Before choosing Highspeed for every change, record these items for a representative set of tasks:
- Scope the attempt. Record the issue, files supplied, number of model calls, and whether a retry starts a new attempt.
- Capture usage from every response. Sum input, output, and separately reported cache categories. Include test logs returned to the model and repeated context; do not estimate from the final patch size.
- Record verification. Save which commands ran, their exit status, and whether the patch passed review. Keep failed attempts in the cost denominator.
- Compare matched tasks. Run the standard and Highspeed routes against the same task set and verification criteria. Record elapsed time as well as token charges; the source's speed claim is not a substitute for your measurements.
- Reconcile with the invoice. Check cache-write treatment, output-token accounting, fees, and current rates before extrapolating to monthly volume.
Highspeed is worth considering when the measured time saved matters enough to justify its higher token cost. If latency is less important, the standard tier is a useful price baseline. Neither route's quoted token rate establishes its cost per successful change without your own usage and verification data.
Conclusion
Start with $1.20 official or $0.6552 OneMux per illustrative uncached Highspeed attempt, then replace the example's token counts with usage from complete repository-change runs. Treat cache savings and verified-change rates as measured inputs, not assumptions hidden inside a headline price.
Sources
- Mercatus: Kimi K3.1 Pro API Pricing — supplied source for official rates, cache terms, and reported Highspeed characteristics; last verified October 25, 2026.
- OneMux Kimi K3.1 Pro Highspeed catalogue and OneMux pricing — OneMux price snapshot captured November 12, 2026; current listings may differ.
Published price snapshot
Captured 2026-11-12T18:00:05.374Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| Kimi K3.1 Pro Highspeed | $4 | $20 | $2.184 | $10.92 | 0.5459999999999999 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does Kimi K3.1 Pro Highspeed cost for a repository change?
At the stated snapshot rates, an illustrative attempt using 200,000 uncached input tokens and 20,000 output tokens costs $1.20 on the official API or $0.6552 through OneMux. Actual usage, cache billing, retries, and other fees can change the result.
Does running tests create model token charges?
The test runner's own compute is separate from model token pricing. However, test commands or logs sent to the model count toward the model usage billed by the route, and the model's responses can add output tokens.
Is Highspeed always worth its higher price?
Not necessarily. Compare elapsed time, total token usage, and cost per verified change on the same repository tasks. The source reports a provider speed claim, not a guarantee for your workload.
Can cached repository context reduce the estimate?
It can when repeated context qualifies for cache reads, but cache writes, expiration, changed prefixes, and route-specific billing can reduce or eliminate the saving. Confirm how writes are charged before forecasting.
Related articles
Guides
Gemini 4 Carbon API Costs for Repository Changes: A Reproducible Estimate
Estimate Gemini 4 Carbon costs for repository code changes and test-verification loops using explicit token, cache, and traffic assumptions.
Guides
GPT 6.2 Astra API cost for repository changes: a reproducible estimate
Estimate the token cost of repository changes and test verification, including cache use, context tiers, retries, and cost per accepted change.
Guides
GPT Image 2.5 Sunburst API Cost: A Reproducible Estimate for Privacy-Aware Workloads
Estimate GPT Image 2.5 Sunburst API costs using explicit token assumptions, monthly workload arithmetic, and practical safeguards for user data and credentials.
Guides
Gemini 4 Carbon API Cost: A Reproducible Support-Triage Estimate
Estimate a Gemini 4 Carbon customer-support triage task with explicit token assumptions, cache accounting, human approval, retries, and OneMux’s published prices.