MiniMax M3.1 Flash API Cost for Repository Changes: A Reproducible Estimate
Estimate MiniMax M3.1 Flash token costs for repository edits and test verification, with explicit assumptions, cache scenarios, and reproducible arithmetic.
Summary · TL;DR
An illustrative repository-change workload costs $0.0126 per task at the cited official input and output rates, or $0.0036036 at OneMux's published rates, before caching and other operating costs.
Key Takeaways
- At 60,000 input and 6,000 output tokens per task, the illustrative model-token cost is $0.0126 at the official rates and $0.0036036 at OneMux's published rates.
- Three model calls per task cost more than a single call when repository context or test output is sent again; count the actual tokens in every call.
- A cache-read scenario can reduce the estimate, but only eligible tokens actually billed at the cache-read rate should be counted as cached.
- Token prices alone do not establish code quality, test success, or total engineering cost.
On this page (13)
The estimate in brief
For an illustrative repository change followed by test verification, budget $0.0126 per task at the cited official rates, or $0.0036036 at OneMux's published rates, assuming 60,000 input tokens and 6,000 output tokens across three model calls. At 100 tasks a day for 30 days, that is $37.80 or $10.8108 respectively, before caching and non-model costs.
These are calculations, not measured results. Actual spend depends on what the agent reads, how much test output it sends back, and how many attempts it takes. OneMux is the publisher of this article and provides model access and routing; its prices are shown alongside the cited official rates so readers can reproduce both estimates.
Prices and units used
All prices below are USD per 1 million tokens, not per request or per repository task. The OneMux catalogue snapshot was captured on November 13, 2026. The supplied Future AGI model page lists the same uncached input and output rates for the Fireworks AI listing and says its pricing was last verified on October 22, 2026. Check current provider terms and OneMux's model page before budgeting.
| MiniMax M3.1 Flash price | Official | OneMux | Published OneMux-to-official ratio |
|---|---|---|---|
| Input, per 1M tokens | $0.15 | $0.0429 | 0.286 |
| Output, per 1M tokens | $0.60 | $0.1716 | 0.286 |
| Cache read, per 1M tokens | $0.015 | $0.00429 | 0.286, calculated from listed rates |
The published 0.286 ratio means the listed OneMux input and output rates are 28.6% of their corresponding official rates. It is a price ratio, not a promise that an entire task or bill will cost 28.6% as much. The supplied Flash catalogue does not list context-based price tiers. Cache eligibility, any cache-write charges, minimums, and other conditions are not established by the supplied snapshot; do not assume an omitted charge is zero.
Define one repository-change task
Use a task as the comparison unit: an agent receives a change request, produces a patch, and reviews the result of running tests. The following allocation is illustrative, not a benchmark or a claim that the model will complete every task in three calls.
| Model call | Illustrative purpose | Input tokens | Output tokens |
|---|---|---|---|
| 1 | Inspect the request and selected repository context; propose an edit | 25,000 | 2,000 |
| 2 | Generate or revise the patch | 20,000 | 3,000 |
| 3 | Review test results and report the outcome | 15,000 | 1,000 |
| Total per task | Three model calls | 60,000 | 6,000 |
The input totals include any repeated instructions, file contents, conversation history, and test logs sent on each call. Output includes generated patch text and the final report. A test runner executes tests outside the model; its logs become model input only if sent back. The estimate does not include compute for running tests, storage, human review, gateway fees, or applicable taxes.
The source describes MiniMax M3.1 Flash as supporting function calling, reasoning, and a 1,048,576-token context window. Those are documented capabilities in the supplied listing, not evidence of measured patch quality or test success. A long context window also does not make repeated repository content free.
Reproduce the uncached cost
For each price schedule, multiply input tokens by the input price per million and output tokens by the output price per million, then add the results. Assume all 60,000 input tokens are billed at the ordinary input rate.
| Calculation | Official rates | OneMux rates |
|---|---|---|
| Input: 60,000 ÷ 1,000,000 × input rate | $0.009 | $0.002574 |
| Output: 6,000 ÷ 1,000,000 × output rate | $0.0036 | $0.0010296 |
| Total per task | $0.0126 | $0.0036036 |
| 100 tasks per day | $1.26 | $0.36036 |
| 3,000 tasks in a 30-day month | $37.80 | $10.8108 |
The task has 66,000 total tokens, so its effective blended price is approximately $0.1909 per million total tokens at the official rates and $0.0546 at OneMux's rates. That blended figure is useful only for workloads with the same 10:1 input-to-output mix; it is not a separate billing rate.
Model a cache-read scenario separately
Suppose that, within the same 60,000 input tokens per task, 40,000 are actually billed as cache reads and the remaining 20,000 at the ordinary input rate. Output remains 6,000 tokens. This is an arithmetic scenario, not a prediction of cache hits or a statement that caching is enabled for this route.
| Component per task | Official rates | OneMux rates |
|---|---|---|
| Ordinary input: 20,000 ÷ 1,000,000 × input rate | $0.003 | $0.000858 |
| Cache reads: 40,000 ÷ 1,000,000 × cache-read rate | $0.0006 | $0.0001716 |
| Output: 6,000 ÷ 1,000,000 × output rate | $0.0036 | $0.0010296 |
| Total per task | $0.0072 | $0.0020592 |
| 3,000 tasks in a 30-day month | $21.60 | $6.1776 |
Count cached tokens once, at the cache-read rate—not again as ordinary input. Initial cache population, cache writes if charged, expiration, and failed cache eligibility could raise the bill. The supplied source lists a cached-input price while also saying prompt caching is not advertised; confirm the route's actual behavior and charges before relying on this scenario.
Turn the estimate into a working budget
- Sample representative tasks. Record input and output usage for every model call, including retries, repair attempts, and calls made after failed tests. Do not substitute repository size for tokens actually sent.
- Separate billing categories. Record ordinary input, eligible cache reads, and output as reported by the route. Check invoices and current terms for charges not represented in the table.
- Track the outcome alongside spend. Record whether the requested tests ran and passed, whether the patch was accepted, and whether follow-up work was needed. A cost per attempted task is not the same as a cost per accepted change.
- Recalculate with your volume. Multiply average model cost per task by expected task count, then add observed retry and operating costs if they are not already included. For planning, also run a higher-token scenario rather than treating the average as a ceiling.
Large test logs and repeated file contents are common places to inspect when usage exceeds the estimate. Sending a targeted failure excerpt can reduce input, but keep enough context to verify the failure correctly. If tests do not run or their output never reaches the model, do not label the task test-verified merely because a final response says it is.
Frequently asked questions
Does the estimate include test execution?
No. It includes model tokens for an illustrative review of test results, but not the machine time or other infrastructure used to execute tests.
Can I compare another model using the blended price?
Only after applying that model's current input, output, and eligible cache prices to the same token mix and task definition. Also compare acceptance and test outcomes: equal token costs do not establish equal effectiveness.
Is the OneMux price the same as the final invoice?
Not necessarily. It is a published per-token snapshot. Actual usage, cache treatment, price changes, and any other applicable charges determine the bill. OneMux offers access to models through an OpenAI-compatible API; check the documented endpoint and parameter support for your intended integration.
Conclusion
Start with the uncached $0.0126 official-rate estimate or $0.0036036 OneMux estimate per illustrative task, then replace the assumptions with observed usage. Treat cache savings and successful test verification as things to measure, not as defaults.
Sources
- Future AGI: MiniMax M3.1 Flash on Fireworks AI — cited model capabilities and pricing listing, marked last verified October 22, 2026.
- OneMux: MiniMax M3.1 Flash — model listing; OneMux catalogue prices in this article use the November 13, 2026 snapshot.
Published price snapshot
Captured 2026-11-13T22:30:05.622Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| MiniMax M3.1 Flash | $0.15 | $0.6 | $0.0429 | $0.1716 | 0.286 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
Does the estimate include test execution?
No. It includes illustrative model-token usage to review test results, but excludes the compute and infrastructure used to run tests.
Can I compare another model using the blended price?
Apply that model's current prices to the same input, output, cache, and task assumptions. Compare acceptance and test outcomes separately because token prices do not measure effectiveness.
Is the OneMux price the same as the final invoice?
Not necessarily. The figures are a published price snapshot; actual usage, cache treatment, price changes, and other applicable charges determine the bill.
Related articles
Guides
GPT 6.2 Astra API cost for repository changes: a reproducible estimate
Estimate the token cost of repository changes and test verification, including cache use, context tiers, retries, and cost per accepted change.
Guides
Hy4 Preview API cost estimates for repository changes with test verification
Estimate Hy4 Preview API costs for repository edits and test verification using explicit token, cache, and pricing assumptions.
Guides
Claude Fable 5.2 API costs for repository changes: a reproducible estimate
Estimate the API cost of repository code changes and test verification using explicit token assumptions, a dated price snapshot, and reproducible arithmetic.
Guides
Gemini 4 Carbon API Costs for Repository Changes: A Reproducible Estimate
Estimate Gemini 4 Carbon costs for repository code changes and test-verification loops using explicit token, cache, and traffic assumptions.