GuidesOneMux

DeepSeek V4.1 Flash 1017: Estimate API Costs Before an Evaluation

A reproducible guide to estimating DeepSeek V4.1 Flash 1017 API costs, with peak and off-peak rates, cache assumptions, and an evaluation budget.

AI

Summary · TL;DR

Use peak, uncached token prices to set a conservative evaluation budget, then calculate actual costs from usage records. The guide compares published official and OneMux rates using the same workload and explains when cache and off-peak assumptions change the estimate.

Key Takeaways

  • For 300 calls capped at 8,000 input and 2,000 output tokens each, the peak uncached token budget is $1.44 at the published official rates or $0.24336 at the published OneMux rates.
  • The published $0.292 blended price per million tokens assumes a 4:1 input-to-output mix and an 80% input cache hit rate; it is not a universal token price.
  • Separate successful Search and Fetch fees from token costs, and verify current pricing and tier eligibility before running an evaluation.
  • Record actual token usage, cache reads, retries, and request timing so subsequent evaluations can be compared on the same basis.
On this page (9)

Start with a bounded evaluation budget

For a repeatable evaluation of DeepSeek V4.1 Flash 1017, budget first for the maximum planned calls at peak, uncached rates. Treat cache hits and off-peak scheduling as separate scenarios, not savings you can assume in advance.

For example, 100 test cases run three times each, with at most 8,000 input and 2,000 output tokens per call, produce a peak token budget of $1.44 at the published official rates or $0.24336 at the published OneMux rates. Those figures exclude tool fees and any calls beyond the 300-call plan. They are illustrative calculations, not results from a paid test.

OneMux, the publisher of this guide, provides access to models through an OpenAI-compatible API. The comparison below uses its published catalogue alongside the LLMLearner rate card; it does not establish model quality or guarantee that a particular workload will receive a cache or time-tier rate.

Rate card and billing assumptions

The OneMux catalogue snapshot was captured on November 13, 2026, at 18:30:05 UTC. LLMLearner's supplied rate card states an effective date of October 17, 2026. Prices below are USD per million tokens; check current terms before budgeting.

TierOfficial inputOfficial outputOneMux inputOneMux outputPublished OneMux-to-official price ratio
Peak$0.30$1.20$0.0507$0.20280.169
Off-peak$0.15$0.60$0.02535$0.10140.169

The published ratio is a price multiplier, not an additional discount to apply to the OneMux prices. The OneMux model listing supplies the tiered catalogue figures.

Cached input readOfficial price per million tokensOneMux price per million tokens
Peak$0.006$0.001014
Off-peak$0.003$0.000507

LLMLearner describes peak windows as weekdays from 01:00–04:00 and 06:00–10:00 UTC, excluding Chinese public holidays; off-peak rates are half the peak rates. The OneMux catalogue labels the same weekday hours as peak and other times as off-peak, but the supplied catalogue description does not specify the holiday exception. Verify the applicable provider's current time and holiday rules, including how a request crossing a boundary is billed.

Cached input is not free. The table prices cache reads; it does not establish cache eligibility, cache-write charges, or any other unlisted fee. Treat unknown charges as unknown, not zero.

Build a repeatable test plan

Use the following illustrative plan to compare runs without letting a change in workload masquerade as a price or quality difference:

  1. Create a fixed set of 100 representative cases. Include short and long inputs, expected-format cases, ambiguous requests, and cases where the correct response is to say the supplied information is insufficient.
  2. Preserve each case's input, expected behavior, and scoring instructions. Score correctness and format separately; a valid-looking response is not necessarily correct.
  3. Run each case three times for a planned total of 300 calls. Record the model identifier, prompt version, generation settings, timestamp, response, and reported usage for every call.
  4. Set an 8,000-token input limit and a 2,000-token output limit per call where the endpoint supports those controls. If an endpoint cannot enforce an input limit, validate inputs before sending them. Confirm which output tokens the provider counts, including any non-visible tokens if applicable.
  5. Set a maximum of 300 total attempts for the base budget, including retries. If a failed attempt needs a replacement, count it against that limit or approve a separate retry allowance before continuing.

These are test-design limits, not a claim that the model or an API automatically enforces a spending cap. Stop the run when the attempt limit or an independently monitored budget is reached. Check endpoint and parameter documentation before relying on any particular control.

Calculate the conservative token budget

At the maximum planned volume, 300 calls generate up to 2.4 million input tokens and 0.6 million output tokens. Assuming all input is uncached and all calls are billed at peak:

ComponentVolumeOfficial calculationOneMux calculation
Input2.4 million tokens2.4 × $0.30 = $0.722.4 × $0.0507 = $0.12168
Output0.6 million tokens0.6 × $1.20 = $0.720.6 × $0.2028 = $0.12168
Total token cost3 million tokens$1.44$0.24336

A planned extra 10% allowance for additional uncached peak calls would bring the token budget to $1.584 official or $0.267696 OneMux, provided the extra calls have the same maximum token shape. This is an allowance, not a forecast of retry frequency. Add any known non-token charges separately.

Understand the blended price before comparing workloads

LLMLearner reports approximately $0.292 per million blended tokens for a 4:1 input-to-output mix with 80% of input served from cache at peak official rates. That figure is useful only when those assumptions match your workload.

For its illustrative monthly assistant workload—10,000 requests, each with 8,000 input and 2,000 output tokens—the arithmetic is:

  • Total input is 80 million tokens: 16 million uncached and 64 million cached.
  • Official peak input cost is 16 × $0.30 plus 64 × $0.006, or $5.184.
  • Official peak output cost is 20 × $1.20, or $24.00.
  • Total is $29.184, conventionally shown as $29.18, across 100 million tokens. The unrounded blended rate is $0.29184 per million tokens.
  • At the published OneMux peak rates and the same volumes, input costs $0.876096 and output costs $4.056, for a total of $4.932096.

If none of the input is cached, the same workload costs $48.00 at official peak token rates or $8.112 at OneMux peak token rates. That difference is why a quote based only on total tokens can be misleading. Likewise, moving every call to an eligible off-peak window halves these particular token estimates; a mixed schedule requires separate peak and off-peak subtotals.

Account for tools and reconcile the run

LLMLearner says Search and Fetch each cost $0.75 per 1,000 successful requests from November 1, in addition to tokens. For example, 300 successful Search requests plus 300 successful Fetch requests would add $0.225 + $0.225 = $0.45 under those stated terms. Whether those tools and fees apply through a particular endpoint or provider must be verified separately; the supplied OneMux catalogue does not establish their availability or charges.

After the run, replace planned maxima with reported uncached input, cache-read input, and output volumes. Split usage by applicable time tier, then add confirmed tool and other charges. Keep failed attempts in the record and reconcile against the provider's invoice: a failed request is not necessarily a free request.

For a fair repeat evaluation, retain the same cases, limits, settings, and scoring rules. Report any changed cache behavior or schedule alongside the cost. Price alone says nothing about whether the responses met the test cases.

Conclusion

Use the peak uncached calculation to approve a bounded test, and use measured usage to explain the final bill. Cache-heavy and off-peak estimates are valuable sensitivity checks, but neither substitutes for verified eligibility and actual usage records.

Sources

Published price snapshot

Captured 2026-11-13T18:30:05.872Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.

ModelOfficial inputOfficial outputOneMux inputOneMux outputPublished price ratio
DeepSeek V4.1 Flash 1017$0.3$1.2$0.0507$0.20280.169

Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.

FAQ

How much does a 300-call DeepSeek V4.1 Flash 1017 evaluation cost?

At the published peak rates, with 8,000 uncached input tokens and 2,000 output tokens on every call, the token cost is $1.44 at official rates or $0.24336 at OneMux rates. Tool fees and any additional attempts are excluded.

Does the $0.292 blended price apply to every workload?

No. It assumes a 4:1 input-to-output token mix, with 80% of input served from cache at peak official rates. Different token mixes, cache-read volumes, or time tiers produce different blended prices.

Are Search and Fetch included in token prices?

The supplied LLMLearner rate card lists them separately at $0.75 per 1,000 successful requests each from November 1. Verify availability and applicable charges with the endpoint or provider you use.

Related articles