DeepSeek V4.1 Flash 1017 Cost Estimate for Production Workflows
Estimate DeepSeek V4.1 Flash 1017 API costs with explicit token assumptions, OneMux time-tier prices, and a practical retry and recovery budget.
Summary · TL;DR
A reproducible cost estimate for a document workflow using DeepSeek V4.1 Flash 1017, with separate peak and off-peak OneMux calculations and explicit retry assumptions.
Key Takeaways
- OneMux’s published DeepSeek V4.1 Flash 1017 rates vary by time: off-peak input/output are $0.02535/$0.1014 per million tokens; peak rates are $0.0507/$0.2028.
- For 10,000 daily requests averaging 3,000 input and 500 output tokens, the estimated 30-day off-peak base cost is $38.03 before retries or recovery.
- A retry policy changes expected cost: with the illustrative retry and recovery rates below, the off-peak estimate becomes about $38.98 per 30 days.
- Treat cache reads, time tiers, and failed attempts as distinct cost factors; verify actual request usage and applicable rates before forecasting.
On this page (7)
Short answer
For a production document workflow averaging 3,000 input tokens and 500 output tokens per request, 10,000 requests a day cost about $38.03 per 30 days at OneMux’s published off-peak rates, before retries and recovery. With the illustrative retry policy in this guide, the estimate rises to about $38.98. This is a planning calculation, not a guaranteed bill: actual token counts, request outcomes, cache use, and time-tier eligibility affect spend.
OneMux is the publisher and product discussed here. Its published catalogue offers access to DeepSeek V4.1 Flash 1017 through a unified API. The figures below use the catalogue snapshot dated 2026-11-08 and its stated tier conditions.
Published prices and billing units
Prices are per 1 million tokens. The catalogue gives different rates for peak and off-peak periods; do not treat them as one flat rate. Peak means Monday–Friday, 01:00–04:00 and 06:00–10:00 UTC. Off-peak means other times.
| Rate and condition | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| Peak | $0.30 | $1.20 | $0.0507 | $0.2028 | 0.169 |
| Off-peak | $0.15 | $0.60 | $0.02535 | $0.1014 | 0.169 |
The ratio is reproduced from the published catalogue; it is not a promise of savings on every workload or a comparison of model quality. The catalogue also lists cache-read prices: at peak, $0.001014 per million tokens through OneMux and $0.006 official; off-peak, $0.000507 through OneMux and $0.003 official. Cache pricing applies only to eligible cached input, not ordinary input or output. Confirm applicable conditions in the model listing and OneMux pricing.
The separate Cost per Prompt page reports $0.15 input and $0.60 output per million tokens and says prices were updated on 2026-10-26. Those match the official off-peak tier in the later OneMux snapshot, not its peak tier. The page also describes a 1M context window. A context limit is not a typical request size: sending a large prompt can materially change the bill. Source: Cost per Prompt’s DeepSeek V4.1 Flash 1017 pricing page.
Reproducible workload estimate
Use this illustrative production profile:
- 10,000 document requests per day, running for 30 days.
- Each request averages 3,000 input tokens and 500 output tokens.
- Requests are billed at off-peak rates, with no cache reads.
- Ignore taxes and any charges not listed in the cited price tables.
Calculate each line separately:
- Input per request: 3,000 ÷ 1,000,000 × $0.02535 = $0.00007605.
- Output per request: 500 ÷ 1,000,000 × $0.1014 = $0.00005070.
- Total per request: $0.00012675.
- Monthly requests: 10,000 × 30 = 300,000.
- Monthly base estimate: 300,000 × $0.00012675 = $38.025, or about $38.03.
At the official off-peak rates of $0.15 input and $0.60 output per million tokens, the same assumptions produce $0.00075 per request and $225 per 30 days. This reconciles with the document-pipeline example on the cited Cost per Prompt page. At OneMux peak rates, the same usage estimates to $0.0002535 per request, or $76.05 per 30 days. These are arithmetic comparisons, not a claim that every request will be billed at a particular tier.
Budget retries and recovery explicitly
Production workflows should forecast additional calls, not assume every document succeeds on the first attempt. For an example policy, assume 2% of requests get one full retry and 1% need one recovery call using half the original input and output. Assume these events are mutually exclusive, and each additional call is billed at the same off-peak rates. This is an illustrative assumption, not a measured failure rate.
The expected cost multiplier is 1 + (0.02 × 1) + (0.01 × 0.5) = 1.025. The resulting monthly estimate is $38.025 × 1.025 = $38.98. If retry and recovery events overlap, or their prompts are larger, use the actual additional token counts instead of this simplified multiplier.
Operational rules that help make the estimate auditable:
- Retry only transient failures, such as timeouts or rate-limit responses, and cap attempts. Use exponential backoff with jitter to avoid synchronized retry bursts.
- Make workflow steps idempotent: record a stable document or job identifier so a repeated call does not create duplicate downstream actions.
- After the retry limit, place the job in a recoverable queue. Resume from the last completed step rather than resending the entire workflow when possible.
- Log input and output token usage, attempt number, outcome, and applicable price tier for each call. Reconcile estimates against observed usage regularly.
- Set a per-job or daily spend limit and alert on unusual retry volume. A failed request can still consume tokens, so count usage even when the workflow does not complete.
Cache and scheduling caveats
Repeated system instructions or conversation history may qualify for cache reads, but do not apply the cache-read rate to all input. For example, at the listed off-peak OneMux cache-read price, 1 million eligible cached input tokens would cost $0.000507; whether a request qualifies depends on the API’s documented caching behavior and the request itself. The supplied pricing information does not establish cache eligibility for every workflow.
Scheduling can also affect estimates. If work runs across peak and off-peak periods, split the token volume by tier and calculate each portion separately. Do not assume a workload can be moved safely just to reach a lower rate: latency requirements, queue capacity, and recovery objectives may outweigh the price difference.
Conclusion
For a useful forecast, start with measured input and output tokens, apply the price tier that actually governs each request, then add explicit retry and recovery volume. The example here gives a reproducible baseline—$38.03 monthly off-peak before retries—and a clearly qualified operational estimate of $38.98 with the stated policy. Recalculate with your own request mix and observed outcomes rather than treating an example workload as a quote.
Published price snapshot
Captured 2026-11-08T11:30:04.915Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| DeepSeek V4.1 Flash 1017 | $0.3 | $1.2 | $0.0507 | $0.2028 | 0.169 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does DeepSeek V4.1 Flash 1017 cost through OneMux?
The 2026-11-08 catalogue lists OneMux off-peak rates of $0.02535 per million input tokens and $0.1014 per million output tokens. Peak rates are $0.0507 and $0.2028 respectively. Peak applies Monday–Friday, 01:00–04:00 and 06:00–10:00 UTC; other times are listed as off-peak.
What does a 10,000-request-per-day document workflow cost?
At 3,000 input and 500 output tokens per request for 30 days, the illustrative estimate is $38.03 at OneMux off-peak rates, excluding retries, recovery, and cache reads. At peak rates the same volume estimates to $76.05.
How should I include retries in an API cost estimate?
Estimate additional calls and their token usage separately. In this article’s example, 2% of jobs get one full retry and 1% get a half-size recovery call, producing a 1.025 cost multiplier when those events are mutually exclusive.
Are cached input prices the same as ordinary input prices?
No. The catalogue lists separate cache-read prices, which apply only to eligible cached input. Confirm caching behavior and eligibility in the applicable API documentation before using cache rates in a forecast.
Related articles
Guides
DeepSeek V4.1 Flash 1017: Estimate API Costs Before an Evaluation
A reproducible guide to estimating DeepSeek V4.1 Flash 1017 API costs, with peak and off-peak rates, cache assumptions, and an evaluation budget.
Guides
Claude Haiku 5.5 API Costs: Budgeting Retries and Recovery
Estimate Claude Haiku 5.5 production workflow costs with explicit token, cache, retry, recovery, and context-tier assumptions.
Guides
DeepSeek V4.1 Flash 1017 API Costs for Document Question Answering
Estimate document question-answering costs using explicit token assumptions, published time-based prices, and a reproducible caching example.
Guides
Estimate MiniMax M3.1 Flash API Costs for Production Workflows
A reproducible MiniMax M3.1 Flash cost estimate for production workflows, with published OneMux rates, explicit assumptions, and practical retry and recovery rules.