Estimating DeepSeek V4.1 Flash 1017 API Costs for Repository Changes
A reproducible way to estimate DeepSeek V4.1 Flash 1017 costs for code changes and test verification, with explicit token assumptions, price snapshots, and cache and time-tier caveats.
Summary · TL;DR
Estimate coding-workflow API spend from input and output tokens per model call—not repository size alone. This guide works through a 3,000-input/400-output-token call, then scales it to a repository-change workflow with test verification. It separates OneMux’s November 9, 2026 catalogue snapshot from a supplied Fireworks pricing source that reports different rates.
Key Takeaways
- Count every model call, including test-failure diagnosis and code revision; retries can materially change the estimate.
- Use separate input and output token totals and the rates for the same provider route and billing period.
- The supplied Fireworks source and OneMux catalogue snapshot show different prices, so do not combine them into one estimate.
- Cache reads and peak/off-peak prices have separate listed rates; apply them only when the request qualifies.
On this page (8)
A repository change is rarely one prompt and one answer. A coding agent may inspect files, propose a patch, read test output, and revise the patch—each model call adds input and output tokens. Estimate those calls explicitly before multiplying by a daily or monthly workload.
This is a cost guide from OneMux, the product discussed here. The example below is illustrative arithmetic, not a measured repository task or a benchmark of model quality.
Start with the workload, not the repository size
For a first-pass estimate, define the average input and output tokens per model call, then count calls per task. Input can include instructions, relevant code, tool results, and test logs. Output can include a patch, explanation, or next-step instructions. The repository’s total size is not necessarily sent on every call: the prompt-building and context-selection strategy determines what reaches the model.
A simple example uses the calculator workload in the supplied pricing source: 3,000 input tokens and 400 output tokens per call. For a repository task, treat this as a baseline call only. A test-verification cycle may use several calls, and the context or test logs may make later calls larger.
Per-call arithmetic
The supplied Future AGI model page reports Fireworks rates of $0.450 per 1 million input tokens and $1.80 per 1 million output tokens. At those rates:
- Input: 3,000 ÷ 1,000,000 × $0.450 = $0.00135
- Output: 400 ÷ 1,000,000 × $1.80 = $0.00072
- Total: $0.00135 + $0.00072 = $0.00207 per call
That calculation is reproducible, but it is not automatically the right rate for every route. The source page says its pricing was last verified October 22, 2026. OneMux’s published catalogue snapshot, captured November 9, 2026, lists different prices for the model. Treat these as separate dated price sets, not interchangeable figures.
Dated price comparison
The OneMux catalogue lists the following USD rates per 1 million tokens in its November 9, 2026 snapshot. Its published price ratio is reproduced as listed; it is not rounded into a claimed discount. The supplied Fireworks source gives the comparison rates below and identifies its verification date.
| Price set and date | Input per 1M tokens | Output per 1M tokens | Published price ratio |
|---|---|---|---|
| Fireworks source, verified Oct. 22, 2026 | $0.450 | $1.80 | Not stated |
| OneMux catalogue snapshot, Nov. 9, 2026 | $0.0507 | $0.2028 | 0.169 |
The OneMux model page also lists time-based rates and cache-read prices. The peak condition is Monday–Friday, 01:00–04:00 and 06:00–10:00 UTC; other times are labelled off-peak. These rates are separate from the table’s standard snapshot and should be used only if the applicable billing conditions are confirmed. Cache-read pricing applies to eligible cached input, not automatically to all input tokens.
| OneMux listed rate | Input per 1M tokens | Output per 1M tokens | Cache read per 1M tokens |
|---|---|---|---|
| Peak | $0.0507 | $0.2028 | $0.001014 |
| Off-peak | $0.02535 | $0.1014 | $0.000507 |
Check the DeepSeek V4.1 Flash 1017 model page and OneMux pricing before budgeting real usage. Prices can change; the snapshot is not a live quote. The supplied Fireworks source reports a 1,048,576-token context window, function calling, reasoning, and prompt caching, but those specifications do not establish the quality or speed of repository edits. Its benchmark scores are reported as pending.
Scale the estimate to a verified code change
Suppose one repository task averages four model calls: one to inspect and plan, one to propose a patch, one to interpret test output, and one to revise or confirm the change. For a deliberately simple estimate, assume every call is 3,000 input and 400 output tokens. That gives 12,000 input and 1,600 output tokens per task.
Using the November 9 OneMux snapshot rates, the calculation is:
- Input: 12,000 ÷ 1,000,000 × $0.0507 = $0.0006084
- Output: 1,600 ÷ 1,000,000 × $0.2028 = $0.00032448
- Total: $0.00093288 per task
- At 1,000 such tasks: $0.93288, before any additional calls or applicable tier and cache differences
This is a planning example, not a prediction. In practice, a test log can add substantial input, and a failed test can cause extra diagnostic and revision calls. Estimate those separately rather than assuming the four-call pattern always holds. If calls occur across peak and off-peak periods, calculate each group at its applicable listed rate; do not apply one rate to the whole month without checking the schedule.
Make the estimate useful in practice
For a repository pilot, record token usage for a representative set of tasks and separate calls into planning, patch generation, test diagnosis, and revision. Use observed averages for each stage, then multiply by the expected number of tasks. Include retries and tasks that stop after a failed test. Keep input and output totals distinct, and identify whether any input was billed as a cache read.
A compact estimate checklist:
- Define one task, including what counts as test verification.
- Count model calls per task, including retries and follow-up patches.
- Estimate input and output tokens for each call type.
- Apply one dated provider or route price set, with matching units.
- Separate eligible cache reads and time-tier traffic if applicable.
- Recalculate with observed usage once a pilot is available.
OneMux provides access to models through an OpenAI-compatible API, with model routing, keys, and spend visibility. Compatibility still depends on the endpoint and parameters your client uses being supported; this guide does not claim a tested integration. For cost control, the useful comparison is the measured cost per verified repository change—not a per-token rate in isolation.
Sources
- Future AGI: DeepSeek V4.1 Flash 1017 Us pricing and model details — supplied source, pricing stated as last verified October 22, 2026.
- OneMux: DeepSeek V4.1 Flash 1017 — catalogue snapshot captured November 9, 2026.
- OneMux pricing — check current published prices before estimating production spend.
Bottom line
For repository edits with test verification, estimate the full call sequence and its input and output tokens. The worked four-call example costs $0.00093288 per task at the dated OneMux snapshot rates, but actual spend depends on prompt size, retries, cache eligibility, and time tier. Recompute from current prices and observed usage before setting a budget.
Published price snapshot
Captured 2026-11-09T08:00:05.886Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| DeepSeek V4.1 Flash 1017 | $0.3 | $1.2 | $0.0507 | $0.2028 | 0.169 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does a 3,000-input/400-output-token call cost?
At the Fireworks rates in the supplied source—$0.450 per 1 million input tokens and $1.80 per 1 million output tokens—the arithmetic is $0.00135 input plus $0.00072 output, or $0.00207 total. The OneMux November 9, 2026 snapshot lists different rates, so use the price set for the route being estimated.
What should I count in a repository code-change estimate?
Count every model call involved in inspecting the change, generating a patch, interpreting test output, revising code, and retrying. Include the input tokens sent on each call, including relevant code and test logs, and the output tokens returned.
Are cached input and off-peak prices included in the example?
No. The worked example uses the OneMux catalogue’s standard input and output snapshot rates. The model page separately lists cache-read and time-based rates; apply them only when the request qualifies and the applicable billing conditions are confirmed.
Why do the supplied source and OneMux show different prices?
They are separate published price sets with different dates and listed rates: the supplied Fireworks source says its prices were verified October 22, 2026, while the OneMux catalogue snapshot was captured November 9, 2026. Do not combine them; check the relevant current route price before budgeting.
Does the pricing information prove the model is good at coding?
No. Prices do not measure code quality, speed, or test success. The supplied source reports function calling and reasoning support, but says public benchmark scores are pending. Assess repository performance with your own representative tasks.
Related articles
Guides
Gemini 3 Pro Image Preview API costs for repository changes: a reproducible estimate
Estimate token costs for repository edits and test-verification workflows, with explicit assumptions, unknown prices, and a reusable calculation.
Guides
GPT Image 2.6 API costs for repository changes: a reproducible estimate
Estimate the image-generation portion of a repository change workflow, then account separately for coding, verification, retries, and unknown provider prices.
Guides
Grok Imagine Image 2.0 API costs for repository changes: an estimate with test verification
Estimate the image-generation portion of a repository-change workflow, with explicit assumptions for revisions, visual checks, and test verification.
Guides
GPT Image 2.5 Flare API Costs for Repository Workflows
Estimate GPT Image 2.5 Flare token costs for a repository-change workflow, with reproducible assumptions and clear limits on what the estimate covers.