GuidesOneMux

GPT Image 2.5 Flare API Costs for Repository Workflows

Estimate GPT Image 2.5 Flare token costs for a repository-change workflow, with reproducible assumptions and clear limits on what the estimate covers.

AI

Summary · TL;DR

At a third-party listed rate of $5 per million input tokens and $30 per million output tokens, an illustrative 3,000-input, 400-output-token request costs $0.027. Four such calls add $0.108 to a repository-change task, before coding-model, test-runner, retry, and other costs.

Key Takeaways

  • The supplied third-party source describes GPT Image 2.5 Flare as an image-generation model; it does not establish that the model can independently edit a repository or run tests.
  • An illustrative workload of 10 changes per day and four model calls per change costs $32.40 over 30 days at the third-party listed standard token rates, excluding other services.
  • The OneMux catalogue snapshot lists the focus model's prices and discount ratio as unknown; unknown is not free.
  • Cached-input and batch rates should only be used after confirming eligibility, applicable output pricing, and the actual billing route.
On this page (9)

The practical answer

Budget $0.108 per repository-change task for the GPT Image 2.5 Flare portion of the illustrative workload below: four requests, each with 3,000 input tokens and 400 output tokens. That uses the third-party listed rates of $5 per million input tokens and $30 per million output tokens. It does not include a coding model, test execution, retries, or other services.

There is an important fit question before the arithmetic. Future AGI’s model page describes GPT Image 2.5 Flare as an image-generation model with vision input; function calling is not advertised. It does not establish that the model can edit code or execute tests. Treat the estimate as the cost of image-related calls within a larger repository workflow—not the cost of an autonomous coding agent. Confirm that your intended endpoint supports the required inputs and outputs before budgeting for production.

OneMux, the publisher of this guide, offers model access through an OpenAI-compatible API. Its supplied catalogue snapshot does not publish a usable price for this model, so the worked estimate is not a OneMux quote.

Price snapshot and comparable units

The OneMux catalogue snapshot was captured on November 17, 2026. The external listing reports its rates as verified on October 22, 2026, citing LiteLLM as its pricing source. These are separate sources, not confirmation of the same price. All known rates below are US dollars per one million tokens.

Price itemOfficial price in OneMux snapshotOneMux price in snapshotPublished OneMux discount ratioFuture AGI listing
Standard inputUnknownUnknownUnknown$5.00
Standard outputUnknownUnknownUnknown$30.00
Cached inputUnknownUnknownUnknown$1.25
Batch inputUnknownUnknownUnknown$2.50

The external listing’s cached and batch input prices do not establish availability or eligibility through OneMux. The supplied source does not specify a batch output rate. Verify the current rate, token accounting, modality charges, and any tier or cache conditions for your actual route before using this estimate as a budget. See the OneMux model page and current pricing page for available product information.

The listed output rate is six times the standard input rate per token. That is a unit-price comparison, not a claim that output will dominate every bill: the number of tokens in each direction matters too.

Calculate the model portion of a verified change

Consider a team changing a repository and checking the result with tests. Suppose an image-related review step makes four Flare calls per task. The counts below are assumptions, not measured usage, and the source does not establish how a particular image maps to billed tokens.

AssumptionIllustrative value
Repository-change tasks10 per day
Flare requests per task4
Input per request3,000 tokens
Output per request400 tokens
Billing period30 days
Cache, batch, and retriesNone included

Using the external listing’s standard rates:

  • Input per request: 3,000 × $5 ÷ 1,000,000 = $0.015.
  • Output per request: 400 × $30 ÷ 1,000,000 = $0.012.
  • Total per request: $0.015 + $0.012 = $0.027.
  • Model cost per task: 4 × $0.027 = $0.108.
  • Model cost per day: 10 × $0.108 = $1.08.
  • Model cost for 30 days: 30 × $1.08 = $32.40.

At this rate and token mix, each additional Flare request adds $0.027. If every task needs one extra request with the same token counts, the 30-day estimate rises by $8.10, to $40.50. A failed or retried request may consume a different number of tokens, so use its actual billable usage when available.

Why the test-verified task costs more

A complete cost per accepted change should add the Flare usage above to the costs of the coding model, any other model calls, test infrastructure, storage, and applicable service charges. Divide the total by the number of changes that actually pass the chosen acceptance checks—not merely by the number attempted. Failed attempts and reruns belong in the numerator if you paid for them.

For example, if the illustrative Flare spend is $32.40 across 300 attempted tasks but only 240 changes pass, the Flare portion is $0.135 per passing change. That is still only one component of the full cost. A passing test suite also verifies only what its tests cover; it is not proof that every change is correct.

Cache and batch: keep the assumptions separate

The external listing shows cached input at $1.25 per million tokens, but also says prompt caching is not advertised. Do not assume a cache hit or apply that rate to a full request without confirming the route’s rules.

As a conditional arithmetic example only, suppose 2,000 of the 3,000 input tokens qualify for the listed cached rate, the remaining 1,000 use the standard input rate, and output stays at the standard rate. Input would cost $0.0025 + $0.005 = $0.0075; adding $0.012 output gives $0.0195 per request. Four calls per task across 300 tasks would then cost $23.40 for that model portion. This is not a forecast of cache eligibility or savings on OneMux.

Likewise, the listed $2.50-per-million batch input rate is half the listed standard input rate. It is not enough to calculate a complete batch request: confirm batch support, output charges, turnaround requirements, and any other conditions first.

Use the estimate in a repository workflow

  1. Define the image-related step. Identify what Flare must receive and produce, and verify endpoint and parameter support for that use. Do not assume an image-generation listing supports code editing, shell execution, or a particular text-response format.
  2. Keep execution separate. Use an appropriate coding workflow to propose and apply a change, then run the repository’s relevant tests in a controlled environment. Record the test result and any reruns.
  3. Record usage by attempt. Capture billable input and output usage for each model call, including retries, along with the number of attempted and passing changes. Check how images and other modalities are charged on the actual route.
  4. Reconcile against invoices. Compare calculated token costs with actual charges. Investigate differences before extrapolating; cache treatment, modality accounting, service fees, and partial or failed requests can change the result.
  5. Choose a denominator. Report both cost per attempted task and cost per passing change. This makes a workflow with frequent failures less likely to look artificially inexpensive.

If the endpoint does not support the needed modality or response format, stop rather than treating the token estimate as evidence of compatibility. If usage data is missing, label the result an estimate and retain a contingency rather than substituting zero.

Conclusion

The reproducible baseline is $0.027 per assumed request, or $32.40 for 1,200 assumed requests at the external listing’s standard rates. For repository changes with test verification, the meaningful decision is whether an image-generation step is useful and supported at all—and then what the entire workflow costs per passing change. OneMux pricing for this model remains unknown in the supplied snapshot.

Sources

Published price snapshot

Captured 2026-11-17T15:00:06.265Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.

ModelOfficial inputOfficial outputOneMux inputOneMux outputPublished price ratio
GPT Image 2.5 FlareUnknownUnknownUnknownUnknownUnknown / not discounted

Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.

FAQ

How much does one GPT Image 2.5 Flare request cost?

At the third-party listed standard rates, a hypothetical request with 3,000 input tokens and 400 output tokens costs $0.027. Actual charges depend on the route, billable usage, modality accounting, and applicable pricing.

Does the estimate include writing code and running tests?

No. It covers only the assumed GPT Image 2.5 Flare calls. Coding-model usage, test infrastructure, retries, and other services must be added separately.

Is the listed cached-input price available through OneMux?

The supplied OneMux snapshot does not publish a cache price for the model. The external listing reports a cached-input rate but also says prompt caching is not advertised; verify eligibility and pricing for the actual route.

Related articles