GuidesOneMux

Kimi K3.1 Pro API Cost Calculator: Reproducible Workload Estimates for Moonshot and OneMux

Estimate Kimi K3.1 Pro API costs with explicit token, cache, tier, and output assumptions. Includes reproducible calculations for official Moonshot pricing and OneMux routing.

AI

Summary · TL;DR

A reproducible way to estimate Kimi K3.1 Pro costs is to hold token volumes, cache behavior, output limits, and routing tier constant. At the published snapshot, a workload with 10 million input tokens and 1 million output tokens costs $30.00 through the official standard API and $8.97 through OneMux before cache-write charges. Those figures are estimates, not a performance benchmark.

Key Takeaways

  • Compare prices in the same unit: USD per 1 million input or output tokens.
  • For 10 million input tokens and 1 million output tokens, the published standard-rate estimate is $30.00 official versus $8.97 through OneMux.
  • Kimi K3.1 Pro is a reasoning model with thinking enabled; output usage can vary, so set and record an output limit where the API supports it.
  • Cache reads and cache writes must be modelled separately. A cache-hit assumption without a cache-write assumption is incomplete.
  • Use fixed test cases and recorded token usage before making a routing or tier decision.
On this page (10)

The decision this calculation should answer

If you are evaluating Kimi K3.1 Pro for a repeatable workload, do not start with a headline price. Start with a fixed test case: how many input tokens arrive, how many output tokens are generated, what fraction of input is cached, and whether standard or Highspeed routing is required.

This guide compares Moonshot's official rates with the published OneMux catalogue snapshot captured on November 11, 2026. OneMux is the publisher of this comparison and provides access to models through an OpenAI-compatible API. The calculations below use USD per 1 million tokens, with input and output billed separately. They are cost estimates, not a measured quality or latency evaluation.

Published Kimi K3.1 Pro prices

The supplied Moonshot source reports official prices last verified on October 25, 2026. OneMux catalogue prices are from the November 11 snapshot. The published price ratio is the OneMux price divided by the corresponding official price; it is not a guarantee of total invoice savings for every request or billing condition.

RouteInput per 1M tokensOutput per 1M tokensPublished price ratio
Official standard$2.00$10.001.000
OneMux standard$0.598$2.990.299
Official Highspeed$4.00$20.001.000
OneMux Highspeed$2.184$10.920.546

The standard OneMux prices are 0.299 of the corresponding official prices in the catalogue snapshot. That means the listed rates are 70.1% lower than the official comparison rates, before any separate cache-write charges or other applicable conditions. The Highspeed ratio is 0.546, or 45.4% below the official Highspeed comparison rate.

See the Kimi K3.1 Pro model page for the published OneMux listing and OneMux pricing for current catalogue information. Prices can change, so preserve the snapshot date when reviewing an evaluation report.

A reproducible workload calculation

Use this formula for an uncached request mix:

total cost = (input tokens / 1,000,000 × input price) + (output tokens / 1,000,000 × output price)

Worked example: 10M input and 1M output tokens

Assumptions:

  • 10,000,000 input tokens per day
  • 1,000,000 output tokens per day
  • No cache hits
  • No cache-write charges
  • 365 operating days
  • Standard Kimi K3.1 Pro tier
  • Prices remain unchanged for the annual illustration
RouteDaily arithmeticDaily costAnnual estimate
Official standard(10 × $2.00) + (1 × $10.00)$30.00$10,950.00
OneMux standard(10 × $0.598) + (1 × $2.99)$8.97$3,274.05

The annual figure is simply daily cost multiplied by 365. It is not a quote, and it excludes taxes, account-specific terms, retries, or cache-write charges.

For a quick comparison, the official Highspeed estimate is (10 × $4.00) + (1 × $20.00) = $60.00 per day. The OneMux Highspeed estimate is (10 × $2.184) + (1 × $10.92) = $32.76 per day. Choose Highspeed only when its latency value is established by your own measurement; the supplied source describes it as the same model at a higher token price and does not provide a workload-specific cost-per-latency result.

Add caching without hiding the assumptions

The supplied source lists these official standard-tier cache prices:

Charge typeOfficialOneMux catalogue
Cached input read per 1M tokens$0.20$0.0598
Cache write, 5-minute TTL, per 1M tokens$2.00$0.598
Cache write, 1-hour TTL, per 1M tokens$4.00$1.196

Suppose 60% of the 10 million input tokens are cache hits, while output remains 1 million tokens. Before cache-write charges, the official standard calculation is:

(6 × $0.20) + (4 × $2.00) + (1 × $10.00) = $19.20 per day

The equivalent OneMux calculation is:

(6 × $0.0598) + (4 × $0.598) + (1 × $2.99) = $5.7408 per day

Do not report either number as a complete cached-workload cost until you add cache writes. You need the number of tokens written and the selected five-minute or one-hour TTL. A cache-hit percentage alone does not reveal those values.

Build a repeatable evaluation before choosing a route

Use the same dataset and limits for every route. A practical test set can contain:

  1. Short case: a normal request with a fixed input and a documented maximum output.
  2. Long-context case: a representative large prompt, staying below the model's published 1M-token context window.
  3. Repeat case: the same prefix sent repeatedly to measure the effect of cache reads.
  4. Failure case: an input near your operational limit, recorded for truncation, timeout, or refusal behavior.

For each case, record the model identifier, tier, request count, input tokens, output tokens, cache-read tokens, cache-write tokens, output limit, and final calculated cost. Kimi K3.1 Pro has thinking enabled, with reasoning_effort options described in the supplied source; output usage may therefore differ between otherwise similar tasks. If your endpoint supports the parameter, record the selected reasoning setting and keep it unchanged across comparisons.

A generic OpenAI-compatible request may look like this, but parameter and endpoint support must be confirmed in the relevant documentation; this example has not been tested by OneMux:

from openai import OpenAI

client = OpenAI(
    base_url="YOUR_DOCUMENTED_COMPATIBLE_ENDPOINT",
    api_key="YOUR_API_KEY",
)

response = client.chat.completions.create(
    model="kimi-k3.1-pro",
    messages=[
        {"role": "user", "content": "Your fixed evaluation prompt"}
    ],
    max_tokens=2000,
)

print(response.usage)

Treat max_tokens and other parameter names as conditional compatibility details, not universal guarantees. If usage fields are absent, do not infer token counts from character length; obtain token accounting from the endpoint documentation or usage response.

Limitations that can change the estimate

The calculations assume the published per-million-token prices apply to all counted tokens. Actual cost can differ when requests retry, output limits change, cache entries expire, or a workload uses a different tier. The source says the model's maximum output defaults to 131,072 tokens and can be raised to the full context limit; that makes an explicit output cap important for reproducibility.

The source also reports Moonshot's own quality and hallucination comparisons with Kimi K3. Those figures are vendor claims and were not independently reproduced in the supplied material. This article therefore compares costs and evaluation procedure, not model quality. Run your own fixed test cases before changing a production route.

Conclusion

For a clearly stated 10M-input/1M-output workload, the published estimate is $30.00 per day through the official standard route and $8.97 through OneMux standard pricing. That comparison is meaningful only because the token units and workload are explicit. Add cache reads, cache writes, tier selection, output limits, and recorded usage before treating the result as a budget decision.

Sources

Published price snapshot

Captured 2026-11-11T21:30:06.126Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.

ModelOfficial inputOfficial outputOneMux inputOneMux outputPublished price ratio
Kimi K3.1 Pro$2$10$0.598$2.990.299

Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.

FAQ

How much does a 10M-input/1M-output Kimi K3.1 Pro workload cost?

Using the stated uncached assumptions, it costs $30.00 per day at Moonshot's official standard rates and $8.97 per day at the published OneMux standard rates. These figures exclude cache-write charges, retries, taxes, and price changes.

What billing units should I use when comparing Kimi K3.1 Pro prices?

Use USD per 1 million input tokens and USD per 1 million output tokens, keeping input and output separate. Do not combine token prices with per-request prices or treat missing values as zero.

How do cache hits change the Kimi K3.1 Pro estimate?

Replace the cached portion of input with the cache-read price, then add cache-write charges separately. For 10M input tokens with 60% cached and 1M output tokens, the pre-write estimate is $19.20 official or $5.7408 through OneMux standard pricing.

Should I use the Highspeed tier for an evaluation?

Only if latency is part of the decision and you measure it with the same test cases. The supplied source describes Highspeed as a higher-priced tier of the same model, but it does not establish a workload-specific cost or latency advantage.

Related articles