Estimate MiniMax M3.1 Flash API Costs with a Repeatable Workload Test
A reproducible way to estimate MiniMax M3.1 Flash API costs: compare published input, output and cache prices, then test a fixed workload with clear limits.
Summary · TL;DR
Estimate M3.1 Flash API spend by separating input, cached input and output tokens, applying published per-million-token prices, and validating the estimate against a fixed set of representative requests. The article includes a worked example and states what the calculation does not measure.
Key Takeaways
- The published snapshot dated 2026-11-07 lists MiniMax M3.1 Flash at $0.15 per million input tokens and $0.60 per million output tokens officially; OneMux lists $0.0429 and $0.1716.
- The OneMux published price ratio is 0.286 of the corresponding official price for both input and output in this snapshot.
- Cache-read prices differ from ordinary input prices, so estimate them separately only when the workload and billing route qualify.
- Use fixed prompts, expected output limits and a representative test set; record actual token counts rather than assuming every request has the same size.
On this page (9)
Short answer
Estimate MiniMax M3.1 Flash API spend from separate input, cached-input and output token totals. For an uncached workload, multiply input tokens and output tokens by their respective per-million rates, then add the results. In the OneMux published price snapshot dated 2026-11-07, the listed rates are lower than the corresponding official rates; that is a catalogue comparison, not a guarantee of a particular workload’s bill or performance.
This guide is for teams building a repeatable cost evaluation: define the test cases and limits first, then compare like-for-like token usage. OneMux is the publisher and product discussed here. The model is available through OneMux unified model routing.
Published MiniMax M3.1 Flash prices
The table uses prices per 1 million tokens, as reported in the supplied pricing information and OneMux catalogue. OneMux’s captured catalogue lists the model’s input and output rates without a tier breakdown. The snapshot is dated 2026-11-07; check the linked model page for current rates and any applicable conditions.
| Price source | Input, per 1M tokens | Output, per 1M tokens | Published price ratio versus official |
|---|---|---|---|
| MiniMax official | $0.15 | $0.60 | 1.000 |
| OneMux catalogue | $0.0429 | $0.1716 | 0.286 |
The ratio is the listed OneMux price divided by the corresponding official price: $0.0429 ÷ $0.15 = 0.286, and $0.1716 ÷ $0.60 = 0.286. In other words, for these two published rates, the OneMux price is 0.286 of the official rate. This comparison does not establish that every request or billing condition has the same effective cost.
The supplied source reports official cached-input pricing of $0.015 per million cached input tokens. The OneMux catalogue lists $0.00429 for cache reads. Treat cache reads separately from ordinary input only if caching is used and the route’s applicable billing conditions support it. Do not count the same token as both ordinary input and a cache read. The source describes M3.1 Flash pricing as flat across the context window; it does not provide a separate long-context tier for this model. Source: Mercatus, “MiniMax M3.1 Flash API Pricing”.
Reproduce a workload estimate
For uncached traffic, use this ordinary arithmetic:
Estimated cost = (input tokens ÷ 1,000,000 × input rate) + (output tokens ÷ 1,000,000 × output rate).
For a workload with cache reads, split input into uncached and cached portions, then add the cache-read cost using the applicable cache rate. This estimate assumes prices are charged linearly by token, ignores any other fees, and uses the rates shown above. It is an estimate, not a bill or a measured test result.
Illustrative example: 10 million input and 1 million output tokens
Assume all input is uncached, all tokens are billed at the listed per-million rates, and there are no other charges.
- Official input: 10 × $0.15 = $1.50
- Official output: 1 × $0.60 = $0.60
- Official total: $1.50 + $0.60 = $2.10
- OneMux input: 10 × $0.0429 = $0.429
- OneMux output: 1 × $0.1716 = $0.1716
- OneMux total: $0.429 + $0.1716 = $0.6006
The example compares published prices for the same token totals. It does not show that the model will produce identical answers, latency or token counts across routes.
If 60% of the 10 million input tokens are eligible cache reads, the remaining 4 million are ordinary input and 6 million are cache reads. Using the supplied cache prices, the illustrative totals become:
- Official: (4 × $0.15) + (6 × $0.015) + (1 × $0.60) = $1.29
- OneMux: (4 × $0.0429) + (6 × $0.00429) + (1 × $0.1716) = $0.36894
This scenario is conditional: the assumed cache-hit share must reflect actual usage, and the route must bill cache reads at the stated rate. A cache-hit percentage should be measured from the evaluation rather than presumed.
Make the evaluation repeatable
A useful cost estimate needs a stable workload, not a hand-picked prompt. Build a small test set from representative tasks and save each prompt and expected constraints. For every case, record:
- Task and input size: include short, typical and long inputs that resemble real requests.
- Output limit: set the same maximum output allowance for each compared run. A limit is not a prediction of how many tokens the model will generate.
- Cache condition: mark whether the request is intended to be uncached or eligible for a cache read. Keep those results separate.
- Token counts: capture actual input and output usage returned by the API, where available. Use those counts in the arithmetic rather than multiplying a single average request size across the whole test.
- Run conditions: record model name, date, route, request settings and any retries. Keep these constant when comparing costs.
Calculate the total by summing each case’s input, cache-read and output costs. Also report the test-set total and the number of requests, so a reader can see the workload scale. If you present an average per request, divide the same total by the same request count for each comparison.
For a fair quality check, define acceptance criteria before running the test—for example, required fields present or a task-specific correctness check. Cost alone cannot establish whether M3.1 Flash is suitable. The supplied source includes MiniMax’s claims about usage cost and speed, but those are not independent measurements for your prompts; this article does not reproduce them.
Limits and common estimation failures
- Using a single blended rate: input and output rates differ substantially. Keep them separate.
- Treating all input as cacheable: cached input has a different listed rate, but the workload may not produce cache reads. Measure eligibility and hits.
- Ignoring changed token counts: two models or settings may use different prompt or completion tokens. Compare both cost and task results using actual usage.
- Treating output limits as actual output: a maximum controls the permitted response length; it does not say how much output will be generated.
- Mixing snapshots or units: use rates from the same dated source and confirm that the billing unit is per million tokens. The OneMux snapshot is not a live benchmark.
- Overgeneralizing a small test: a fixed evaluation is reproducible, but its results only describe those cases and settings. Add cases when production traffic differs.
OneMux provides access to models through one OpenAI-compatible API, but compatibility depends on the documented endpoint and support for the parameters your evaluation uses. Do not assume every provider-specific option behaves identically across routes. See the MiniMax M3.1 Flash model page for its catalogue entry and the OneMux pricing page for published pricing information.
Sources
- Mercatus: MiniMax M3.1 Flash API Pricing — supplied source for official rates, cache rate and pricing context.
- OneMux: MiniMax M3.1 Flash — published model catalogue entry used for the OneMux price snapshot dated 2026-11-07.
Conclusion
For a repeatable M3.1 Flash cost estimate, preserve the test cases, cap outputs consistently, capture actual token counts and separate cache reads from ordinary input. Then apply one dated set of per-million rates and publish the assumptions beside the total. That produces a result others can reproduce—and makes clear where the estimate stops.
Published price snapshot
Captured 2026-11-07T23:30:04.928Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| MiniMax M3.1 Flash | $0.15 | $0.6 | $0.0429 | $0.1716 | 0.286 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does MiniMax M3.1 Flash cost per million tokens?
The supplied source lists official rates of $0.15 per million input tokens and $0.60 per million output tokens. The OneMux catalogue snapshot dated 2026-11-07 lists $0.0429 input and $0.1716 output per million tokens. Check current published prices and applicable conditions before estimating a new workload.
How do I calculate MiniMax M3.1 Flash API cost?
For uncached usage, multiply input tokens divided by 1,000,000 by the input rate, then add output tokens divided by 1,000,000 times the output rate. If cache reads apply, separate those tokens and use the applicable cache-read rate instead of counting them as ordinary input.
What is the MiniMax M3.1 Flash cache price?
The supplied source lists the official cache-read price as $0.015 per million tokens. The OneMux catalogue snapshot lists $0.00429. Cache pricing only applies when the usage qualifies as a cache read under the route’s billing conditions.
Does a repeatable cost test prove which model is better?
No. It makes cost comparisons reproducible for the chosen prompts, settings and limits. Model suitability also depends on task-specific quality criteria, which should be defined and evaluated separately.
Related articles
Guides
Kimi K3.1 Pro API Cost Calculator: Reproducible Workload Estimates for Moonshot and OneMux
Estimate Kimi K3.1 Pro API costs with explicit token, cache, tier, and output assumptions. Includes reproducible calculations for official Moonshot pricing and OneMux routing.
Guides
Gemini 3.1 Flash Image API costs: a repeatable evaluation budget
Estimate the cost of a bounded Gemini 3.1 Flash Image evaluation using explicit token assumptions, image-price caveats, and reproducible test cases.
Guides
GPT Image 2.5 Sunburst API Cost: A Reproducible Estimate for Privacy-Aware Workloads
Estimate GPT Image 2.5 Sunburst API costs using explicit token assumptions, monthly workload arithmetic, and practical safeguards for user data and credentials.
Guides
Gemini 4 Carbon API Cost: A Reproducible Support-Triage Estimate
Estimate a Gemini 4 Carbon customer-support triage task with explicit token assumptions, cache accounting, human approval, retries, and OneMux’s published prices.