Estimating Kimi K3.1 Pro Highspeed Costs for JSON Extraction
A reproducible way to estimate Kimi K3.1 Pro Highspeed API costs for structured extraction, with dated OneMux and official rates, explicit workload assumptions, and cache and validation caveats.
Summary · TL;DR
For a workload using 10 million input tokens and 1 million output tokens per day, the listed rates produce an illustrative cost of $60 per day at Moonshot's official Highspeed prices and $32.76 per day at the OneMux published rates. The estimate excludes cache effects, retries, and validation overhead; real costs depend on measured token use and applicable billing terms.
Key Takeaways
- At the November 8, 2026 OneMux catalogue snapshot, Highspeed is listed at $2.184 per million input tokens and $10.92 per million output tokens, compared with official rates of $4 and $20.
- For the example workload of 10 million input and 1 million output tokens per day, the arithmetic is $60 official or $32.76 using the listed OneMux rates.
- JSON Schema validation is a separate application step: valid JSON output is not, by itself, proof that the result satisfies your schema or extraction rules.
- Treat the estimate as a baseline. Cache billing, retries, reasoning output, and differences between estimated and actual token counts can change the bill.
On this page (8)
The quick estimate
For a structured-extraction workload using 10 million input tokens and 1 million output tokens per day, the listed token rates give an illustrative cost of $60 per day at Moonshot's official Kimi K3.1 Pro Highspeed rates, or $32.76 per day at the OneMux rates captured on November 8, 2026. These figures exclude cache effects, retries, and any work your application performs for validation or repair.
That comparison is only useful if the token volumes and billing units match. Estimate input and output separately, then replace the example volumes with counts from your own extraction requests. OneMux is the publisher of this comparison; its published catalogue rates are a price snapshot, not a performance test or a promise of total workload savings.
Published prices and units
The following rates were published in the OneMux catalogue snapshot captured 2026-11-08 at 15:30 UTC. Amounts are per 1 million tokens, as shown in the supplied pricing information. Confirm current prices and any applicable tier or cache terms before budgeting.
| Rate type | Official Highspeed | OneMux published rate |
|---|---|---|
| Input tokens | $4.00 per 1M | $2.184 per 1M |
| Output tokens | $20.00 per 1M | $10.92 per 1M |
| Published price ratio to official | — | 0.546 |
The published ratio, 0.546, means the listed OneMux input and output prices are each 54.6% of the corresponding official price in this snapshot. That is a comparison of listed rates, not a guarantee that a particular workload will cost 45.4% less: actual totals depend on token counts, caching, retries, and any relevant billing conditions.
The supplied catalogue also lists cache rates. Official cache reads are $0.20 per million tokens; cache writes are $4.00 per million for the standard write tier and $8.00 for the one-hour tier. OneMux lists cache reads at $0.1092, writes at $2.184, and one-hour writes at $4.368 per million. Cache behavior and applicability can vary; do not add these prices to a workload estimate unless you know which tokens are billed under each category.
Reproduce the workload arithmetic
Use this simple calculation for a first-pass estimate:
Estimated cost = input tokens ÷ 1,000,000 × input rate + output tokens ÷ 1,000,000 × output rate
For the illustrative daily workload:
- Input: 10 million tokens
- Output: 1 million tokens
- Retries and cache effects: excluded
Official rates: 10 × $4.00 + 1 × $20.00 = $60.00 per day.
OneMux published rates: 10 × $2.184 + 1 × $10.92 = $32.76 per day.
For a 30-day month with the same daily volumes, multiply each daily estimate by 30: $1,800 official or $982.80 at the snapshot's OneMux rates. This is arithmetic from stated assumptions, not an observed bill. To apply it to your workload, count or measure input and output tokens over representative production requests; do not substitute document count for token count without measuring the conversion.
Make the estimate fit JSON Schema extraction
In a structured extraction pipeline, input tokens include the source material and instructions, while output tokens include the returned extraction and any reasoning or other generated content billed as output. Schema descriptions, examples, and long prompts can raise input usage. A verbose schema-shaped response can raise output usage. The source pricing material says Kimi K3.1 Pro has thinking enabled and that output token counts can be higher than for a non-reasoning model; it does not provide a fixed output allowance per extraction task. Measure your own prompt and response sizes rather than assuming each record has a standard cost.
A practical estimate should include these steps:
- Choose a representative batch of documents and record input and output token counts for the requests.
- Calculate the average or distribution you need for planning. Keep unusually long documents visible rather than hiding them in an average.
- Apply input and output rates separately using the formula above.
- Add expected retries or repair calls only after measuring how often your pipeline makes them and their token use.
- Compare the resulting estimate with actual usage and revise the workload assumptions.
Schema validation is a separate check in your application. Parse the returned JSON and validate it against your schema; then check task-specific rules such as required fields, allowed values, and whether extracted values are grounded in the source. A response that parses as JSON may still fail these checks. Budget for any correction request as another model call, using its own input and output token counts. The supplied sources do not establish a schema-validation success rate or extraction accuracy, so neither should be assumed in a cost forecast.
When to account for caching and Highspeed
The official pricing source lists a $0.20-per-million cached-input rate and separate cache-write prices; the OneMux snapshot also lists distinct cache rates. A simple no-cache estimate is easier to reproduce, but it can misstate costs if your requests repeatedly send a cacheable prefix. Only model a cache discount when your integration's behavior and provider billing records confirm which tokens qualify and how writes are charged.
Highspeed is a distinct tier, not a separate extraction capability established by the supplied evidence. Moonshot's pricing source describes it as the faster tier at twice the standard Kimi K3.1 Pro prices and says Moonshot claims two to three times the speed. That speed statement is a vendor claim, not a result measured in this article. For latency-sensitive extraction, test end-to-end latency on your own representative documents and compare the value of faster completion with the additional listed cost. For the official and OneMux Highspeed rates, see the Kimi K3.1 Pro Highspeed model page and OneMux pricing.
Decision checklist
Before approving a budget, confirm that input and output units match the published per-million-token rates; measure representative extraction traffic; include schema failures and retries only using observed rates; and verify whether cache read and write pricing applies to your route. Recheck the catalogue when you make the decision, since this article's OneMux rates are dated. The model and rate information in the supplied Moonshot pricing source was last verified there on October 25, 2026; this article's OneMux price snapshot is dated November 8, 2026.
The useful takeaway is not a universal cost per document. It is a reproducible method: measure tokens, price input and output separately, and make cache and retry assumptions explicit. For the stated example, that method yields $60 per day at official Highspeed rates and $32.76 per day at the snapshot's OneMux rates, before excluded costs or billing conditions.
Sources
- Moonshot Kimi K3.1 Pro API pricing — official rates and cache terms, as summarized in the supplied source; last verified there on October 25, 2026.
- OneMux Kimi K3.1 Pro Highspeed model page — OneMux catalogue rates; snapshot captured November 8, 2026.
Published price snapshot
Captured 2026-11-08T15:30:05.361Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| Kimi K3.1 Pro Highspeed | $4 | $20 | $2.184 | $10.92 | 0.5459999999999999 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does the example JSON extraction workload cost?
At 10 million input tokens and 1 million output tokens per day, the listed official Highspeed rates calculate to $60 per day. The OneMux snapshot rates calculate to $32.76 per day. Both examples exclude cache effects, retries, and validation overhead.
What are the Kimi K3.1 Pro Highspeed token rates?
The supplied OneMux catalogue snapshot from November 8, 2026 lists official rates of $4 per million input tokens and $20 per million output tokens, and OneMux rates of $2.184 and $10.92, respectively. Check current pricing and route conditions before relying on these dated figures.
Does a JSON Schema guarantee valid extraction?
No such guarantee is established by the supplied sources. Treat parsing and schema validation as application checks, and separately verify task-specific requirements such as required fields and source grounding. Budget for repair calls if your measured pipeline uses them.
Are cache discounts included in the example?
No. The worked example uses input and output rates only. Cache reads and writes have separate published rates, so include them only when your request pattern and billing records establish how those charges apply.
Is the Highspeed speed claim independently measured here?
No. The supplied Moonshot pricing source reports the vendor's claim that Highspeed is two to three times faster. This article does not independently test throughput or latency.
Related articles
Guides
Kimi K3.1 Pro Highspeed: Estimate the Cost of Repository Changes and Test Verification
A reproducible cost estimate for repository code changes and test verification using Kimi K3.1 Pro Highspeed, with cache assumptions and a standard-tier comparison.
Guides
Estimating Kimi K3.1 Pro Highspeed Costs for Document Q&A
A reproducible cost estimate for document question answering with Kimi K3.1 Pro Highspeed, including official and OneMux prices, cache assumptions, and workload arithmetic.
Guides
Estimate Qwen3.7 Plus API Costs for JSON Extraction
A reproducible way to estimate Qwen3.7 Plus costs for schema-validated JSON extraction, with explicit workload assumptions, price tiers, retries, and caching caveats.
Guides
GPT 6.2 Sol API cost: a reproducible evaluation budget
Estimate GPT 6.2 Sol evaluation costs with explicit token assumptions, context-tier pricing, cache examples, and repeatable test limits.