Estimate Kimi K3.1 Pro API Costs for Repository Changes and Test Verification
A reproducible way to estimate Kimi K3.1 Pro API costs for repository edits and test verification, with dated OneMux and official prices, explicit token assumptions, and cache caveats.
Summary · TL;DR
For a clearly labelled example of 100 repository changes per month, each using 100,000 input tokens and 20,000 output tokens, the estimated uncached cost is $40 at Moonshot's official standard rates and $11.96 at OneMux's published rates in a November 8, 2026 snapshot. Actual spend depends on token use, cache billing, and whether the model completes the required edits and verification.
Key Takeaways
- Estimate cost per completed change from measured input and output tokens; do not assume that repository size maps directly to token use.
- At the stated example workload, 10 million input and 2 million output tokens cost $40 at official standard rates or $11.96 at the OneMux snapshot rates, before any applicable cache conditions.
- Treat test execution and verification as part of the workflow: capture the tokens for repair rounds and failed attempts, not just the initial edit.
- The published OneMux price ratio is 0.299 of the official listed input and output prices; this is a price comparison, not a claim about performance or guaranteed savings.
On this page (7)
Short answer
For a repository-change workload, start with tokens per completed change—not a generic “cost per coding task.” At the November 8, 2026 OneMux catalogue snapshot, Kimi K3.1 Pro is listed at $0.598 per million input tokens and $2.99 per million output tokens, compared with Moonshot's official standard rates of $2 and $10. Under the illustrative assumptions below, 100 changes cost $11.96 through the listed OneMux rates or $40 at official rates, before cache effects.
These are token-cost estimates, not measured coding results. OneMux is the publisher of the OneMux rates and provides access to models through one OpenAI-compatible API. Whether an integration works as intended depends on endpoint and parameter support.
Prices and comparison basis
The table uses the published price snapshot captured on November 8, 2026. Rates are per million tokens. The published price ratio of 0.299 means the listed OneMux price is 29.9% of the official listed price for both standard input and output; equivalently, the arithmetic difference is 70.1%. It does not establish equivalent performance, task success, or total cost for a completed change.
| Kimi K3.1 Pro standard rate | Official | OneMux | Published price ratio |
|---|---|---|---|
| Input, per 1M tokens | $2 | $0.598 | 0.299 |
| Output, per 1M tokens | $10 | $2.99 | 0.299 |
Source: OneMux Kimi K3.1 Pro catalogue page and OneMux pricing, snapshot dated November 8, 2026. The official rates and cache terms are described in the Kimi K3.1 Pro pricing source. Prices can change; check the current listings before budgeting.
Moonshot's source lists official cached input at $0.20 per million tokens, with cache writes at $2 per million for a five-minute time-to-live and $4 per million for a one-hour time-to-live. The OneMux catalogue lists cache reads at $0.0598 per million and cache writes at $0.598 or $1.196 for those durations. These cache rates are not interchangeable with ordinary input rates: a real estimate needs the number of cache reads, cache writes, and uncached input tokens. The calculation below excludes caching on both routes for a like-for-like, easy-to-reproduce baseline.
Reproducible repository workload estimate
This is an illustrative budget, not a measured run. Assume 100 completed repository changes in a month. Each change includes repository context, instructions, relevant file content, a proposed patch, and a response describing test verification. Assign each change 100,000 input tokens and 20,000 output tokens. That gives:
- Input: 100 changes × 100,000 = 10,000,000 tokens, or 10 million.
- Output: 100 changes × 20,000 = 2,000,000 tokens, or 2 million.
- No cached input, cache-write fees, Highspeed tier, or retries are included.
| Route | Input calculation | Output calculation | Estimated total |
|---|---|---|---|
| Official standard | 10 × $2 = $20 | 2 × $10 = $20 | $40 |
| OneMux listed standard | 10 × $0.598 = $5.98 | 2 × $2.99 = $5.98 | $11.96 |
Here, the factors 10 and 2 are millions of tokens. For your own workload, use: input millions × input price per million + output millions × output price per million. Keep input and output separate; output tokens cost more per token at both listed rates.
Measure the workflow that actually ships
A repository edit is not complete just because the model returned a patch. For a useful estimate, measure a full, bounded cycle:
- Give the model the task and the files or repository context it needs.
- Apply the proposed change in a controlled working tree.
- Run the relevant tests and provide failures or results back to the model if another edit is needed.
- Record input and output tokens for every model call until the change passes your chosen checks or is abandoned.
The 100,000-input/20,000-output assumption is a planning placeholder. Replace it with token counts from representative changes. Include test logs only to the extent they are sent to the model; tests run locally do not themselves create model tokens. Record retries separately, since a failed first patch or a large test failure report can increase both input and output. A task that needs several repair rounds should not be budgeted as a single call.
For a small pilot, sample a mix of routine edits and harder changes, such as work touching several files. Calculate average and high-end tokens per completed change, and multiply each by expected monthly volume. Keep the success rate separate from token price: lower per-token rates do not show that more tasks will pass tests or require fewer repair rounds.
What can change the estimate
Kimi K3.1 Pro's official pricing source describes thinking as always on and says output usage can vary with reasoning effort. It lists a 1,048,576-token context window, but a large context allowance is not a forecast of how many tokens a particular task will consume. The estimate depends on the context you send, generated response length, and follow-up calls.
The Highspeed tier is priced separately: official rates are $4 per million input and $20 per million output; the OneMux catalogue lists $2.184 and $10.92. Do not mix these rates with the standard-tier estimate. The source describes Highspeed as the same model at twice the official standard price and claims two to three times the speed; treat that as the provider's description, not a measurement of your repository workflow.
Caching can reduce repeated-prefix input costs, but only if the requests and cache behavior qualify under the route's terms. Check the cache read and write prices, duration, and actual hit rate before adjusting a budget. Do not count all repeated repository context as cached without evidence that it is being billed that way.
Practical decision checklist
- Confirm which endpoint, model name, and parameters your client can use; OpenAI-compatible access alone does not confirm support for every parameter.
- Track input and output tokens separately for completed changes, retries, and abandoned work.
- Compare standard with standard, or Highspeed with Highspeed; keep cache charges separate.
- Include test feedback sent to the model, but exclude local test execution from token totals.
- Recheck published prices and your own token sample before committing to a monthly budget.
For model-specific published details, see the Kimi K3.1 Pro page. The useful budget is the one based on your completed, test-verified changes—not just the cheapest rate on a price page.
Published price snapshot
Captured 2026-11-08T16:30:05.452Z from the OneMux published catalogue. Prices retain website billing units; this is not a live benchmark. Tiered, cached or time-based billing may differ. Unknown values are not zero.
| Model | Official input | Official output | OneMux input | OneMux output | Published price ratio |
|---|---|---|---|---|---|
| Kimi K3.1 Pro | $2 | $10 | $0.598 | $2.99 | 0.299 |
Current OneMux prices. Compare workload costs only when input/output and billing units match; see each model page for tier conditions.
FAQ
How much does Kimi K3.1 Pro cost for a repository change?
It depends on input and output tokens. In the illustrative example, one change uses 100,000 input and 20,000 output tokens. That is $0.40 at official standard rates ($0.20 input plus $0.20 output) or $0.1196 using the November 8, 2026 OneMux listed rates ($0.0598 plus $0.0598), excluding cache fees and retries.
What is included in the 100-change estimate?
It assumes 100 changes, each with 100,000 input tokens and 20,000 output tokens, for 10 million input and 2 million output tokens total. It excludes cached input, cache writes, Highspeed pricing, retries, and local test execution.
Does the estimate include test verification?
It includes a response describing test verification, but not test execution as a separate model charge. Any test output or failure details sent back to the model add input tokens, and repair calls add further input and output.
Are OneMux and official rates a performance comparison?
No. The table compares published token prices only. It does not establish equivalent task success, latency, or test pass rates.
How should I account for cache pricing?
Count cached reads, uncached input, and cache writes separately using the applicable route's published terms. The example excludes caching because a reliable estimate requires actual cache behavior and hit rates.
Related articles
Guides
Kimi K3.1 Pro API costs for incident diagnosis: a reproducible estimate
Estimate Kimi K3.1 Pro API costs for diagnosing incidents from logs and metrics, with explicit token, cache, and tier assumptions.
Guides
Kimi K3.1 Pro API Cost Calculator: Reproducible Workload Estimates for Moonshot and OneMux
Estimate Kimi K3.1 Pro API costs with explicit token, cache, tier, and output assumptions. Includes reproducible calculations for official Moonshot pricing and OneMux routing.
Guides
Estimate Kimi K3.1 Pro API Costs for Support Triage
A reproducible Kimi K3.1 Pro cost estimate for customer-support triage with human approval, including published OneMux and official rates, assumptions, and cache caveats.
Guides
Estimate Kimi K3.1 Pro API Costs for Production Workflows
A reproducible Kimi K3.1 Pro cost estimate for production workflows, including published OneMux rates, retry assumptions, cache caveats, and recovery rules.